Description:
2011 Professional LT2810/LT2820 Loader. 2011Professional LT2810/LT2820 Loader
·Innovative One-piecemainframe
Hydraulic oil tank, fuel tank and chassis was designed as anintegral structure that made the machine more compact anddurable.
·Closed circuit hydraulic system
Traveling hydraulic system adopts closed loop circuit with featuresof compact structure, good maneuverability and less heatgeneration.
·Strong power system
World famous engine generates enough power for all jobs.
·Bigger lifting height
Optimum design makes the SWL able to reach bigger lifting height inits class.
·Auto-leveling system
When the boom is lifting, the bucket automatically keepslevelling.
·Safe working condition for operator
The cab gets lots of space and good view. All instruments andoperating buttons are within the reach of the operator.It is inline with ROPS/FOPS regulation. Ergonomically designed armrestprevents the operator from falling off the chair accidentally.
·Easy operation
Operators may enjoy the Proportional controlled pilot joystick bygetting familiar with the machine quickly with less fatigue.
·Standard quick coupler
Internationally universal quick coupler fits various attachments inthe world.
·Double Accelerograph-control
Accelerograph can be controlled by hand or foot.
·Multi-function
The machine works with a wide range of attachments, including thatof high flow system.
·Convenient Maintenance
All daily maintenance can be completed when open the rear cover.Thecabin can be turned forward in large-angle.
| Main Parameters | |
| Dimensions:L×W×H | 3261 x 1600 x 2018 (mm) |
| Total Weight | 2780kg |
| Properties | |
| Load capacity | 725kg |
| Tipping load | 1450kg |
| Bucket breakout force lift | 2000kg |
| Boom breakout force lift | 1900kg |
| Max. speed | 13.6km/h |
| Engine model | Yanmar 4TNV84T |
| Engine type | 4-cylinder water-cooled diesel engine |
| Engine emission standards | EPA Tire2 / EU Stage 2 |
| Engine rated power | 39.9kw / 2800rpm |
| Max. engine torque | 160.5N.m / 1800rpm |
| Transmission | |
| Type | Hydrostatic closed circuit |
| Main pump | 2 x Variable displacement piston pump |
| Motor | Two radial piston quantitative motor |
| Hydraulic System | |
| Type | Throttle system |
| Pump | Gear Pump |
| Max. pressure | 210bar |
| Max. flow | 70.0 33.6 L/min |
| Control valve | Three joint multi-way valve |
| Control mode | ISO model of pilot control |
| Electrical Systems | |
| Starter motor | 12V / 2.3kw |
| Alternator | 12V / 40A |
| Battery | 80Ah |
| Service Refill Capacities | |
| Hydraulic oil tank | 50L |
| Fuel tank | 70L |
| Sprocket fuel tank | 30L |
| Engine oil | 7.4L |
| Engine coolant | 7.7L |
| Running configuration: Tires size | 10-16.5 |
| Optional Configuration | Large flow system, side windows, closed cab, heater, airconditioning, multi-function LCD instrumentation, warning lights,reversing alarm, external power supply, etc. |
| Optional Aids | All kinds of buckets, four are bucket, hammer, screwdrills, fork, cleaning devices, earth-moving shovel, clip Mucha,clamp bucket, digging devices, milling devices, blowing snowmachines, etc. |
Working parameters
| A. Max. operating altitude | 3850mm |
| B. Height to bucket hinge pin | 3002mm |
| C. Height to top of cab | 2018mm |
| D. Height to bottom of level bucket | 2834mm |
| E. Overall length without attachment | 2475mm |
| F. Overall length with standard bucket | 3261mm |
| G. Max. height of the unloaded angle | 42° |
| H. Dumping height | 2320mm |
| J. Dumping reach | 475mm |
| K. Bucket on the ground of the flip angle | 30° |
| L. Bucket at the highest flip angle | 97° |
| M. Wheelbase | 987mm |
| P. Ground clearance | 190mm |
| Q. Angle of departure | 25° |
| R. Without the attachments before turningradius | 1168mm |
| S. Before turning radius | 1954mm |
| T. After the turning radius | 1534mm |
| U. Tail length(rear axle to bumper) | 960mm |
| V. Two tires center distance | 1293mm |
| W. Bucket width | 1600mm |
