Description:
1.Capacity:0.5t-32t2.Height: 3m-100m
3.Voltage: 380V/50Hz/3phases
4.Waranty:12 month
5.CE, GS & ISO9001, insured by PICC
CD1-Electrichoist Introduction:
Type CD1 (MD1), wire-ropeelectric hoist is a kind of small-lifting equipment, it can bemounted on single beam overhead crane, gantry cranes, jib type CD1(MD1). Electric hoist as only one normal speed which can satisfynormal application. It is widely used in factories, mines,harbours, warehouses, cargo storage area and shops, essentially inraising working efficiency and improving workingconditions.
1. CD1 and MD1 series of steel-rope electric hoist are improved ones on the basis of the original CD and MD .
2. Tight structure ,smart body, safety and reliability ,commom
used parts, strong lifting capacity, easy maintance.
3. The hoists exists in form of stationary style and crab-style.
4. The products are widely at industrial ore enterprises ,railway, harbors,warehouses and materials sites etc.
5. Working environment:no fire,no explosive danger ,no corrosive media and no dirt exist.
6. Working temperature:-25°C~ 40°C ,Wetness is less than 85%.
7. 380v/50Hz/3Phases
8. Mainly consists 3 parts:lifting mechanism ,traveling mechanism and electrical equipment
9.With slight modification, it also can be use as a which.
10.Electric wire rope Hoist is assembled by several parts:
Motor | HoistMotor is a taper type rotor motor with braking; it is of thebest quality motors, it has bigger torque, so it can be adapted tomoving frequently, the Maximum torque is 2.4-3 times than the ratedtorque. |
GearBox | HoistGear Box has specially treated gears for high wear resistance. EachGeared Shaft assembly is supported on ball or roller bearings, toensure smooth, low-friction operation. |
WireRope | Hoistingrope comply with the exporting standards. The leading rope taken bythe Drum does not slip sideways when slack. The factor of safety,on the nominal breaking strength of the rope is six. |
RopeDrum | GroovedDrum, seamless pipe of adequate length to be wounded in one layerand to provide proper support for the rope to minimize abrasivewear is provided. Drum Shaft resolves on Ball Bearings for ensuringsmooth running. |
Electricapparatus controlling system | Model CD1or MD1 is composed of the contactor box, controlling switch,cut-off limiter. The working voltage of controlling switch is 380V,36V or 24V (safety voltage). |
RopeGuide | RopeGuide is in two halves, ensuring easy accessibility. It encirclesthe Drum completely so that the rope may not uncoil even when theHoist is in unloaded condition. The rope guides of our company isthicken and dilated, so that it is not easy to bedamaged.
|
Hook | The hookblock is tested to 150 % of full load before assembly. The ropesheaves are fully guarded with protective steel casting. Allsheaves rotate on ball bearing. The pulley is thicken and dilatedthan domestic common |
CD1-Electrichoist Parameters:
Model | 0.25TON | 0.5TON | 1TON | 2TON | 3TON | 5TON | 10TON |
Capacity ton | 0.25 | 0.5 | 1 | 2 | 3 | 5 | 10 |
Standard Lift m | 3-9 | 6-12 | 6-30 | 6-30 | 6-30 | 6-30 | 6-30 |
Lifting Height m/min | 8 8/0.8 | 8 8/0.8 | 8 8/0.8 | 8 8/0.8 | 8 8/0.8 | 8 8/0.8 | 7 7/0.7 |
Running Speed m/min | 20/30 | ||||||
Wire Rope Type | 6*19-3.6 | 6*37-4.8-180 | 6*37-7.4-180 | 6*37-11-155 | 6*37-13-170 | 6*37-15-200 | 6*37-15-200 |
I Beam Track Type | 16-22b | 16-28b | 16-28b | 20a-32c | 20a-32c | 25a-63c | 28a-63c |
Loop Track Minimum Radius m | 0.8 | 1.5 | 1.5-4 | 2-4 | 2-4 | 2.5-5 | 3.5-9 |
Voltage V | 380 | 380 | 380 | 380 | 380 | 380 | 380 |
Frequency HZ | 50 | 50 | 50 | 50 | 50 | 50 | 50 |
Phase | 3 | 3 | 3 | 3 | 3 | 3 | 3 |
Highquality material:
1.Electricalequipment:Schneider Control boxmaterial:Q235B
2.Motor:Nanjing specialelectric
3.Bearing:Ha‘erbinBearing
4.Gear:20Chromium manganesetitanium
5.Hook:40 chrimium forge
6.Wire rope:Guizhou Julong limitedliability company
7.Transmission shaft:45#quenched andtempered steel
8.Cover and coiling block:thickensteel plate
HoistsEnquiry information need:
1. Capacity
2. Lifting height
3. Lifting speed and runningspeed requirement.
4. Power supply
5. Any other special requirementyou need, like I beam type
Note
1. We only manufacture the high quality hoist
2. Different power supply available
3. OEM
4. Color variety
