Description:
13hp, 700mm SWING SAW/LOG CUTTER/ LOG BENCH SAW/TABLE SAW/FIREWOODCUTTING SAW/FIREWOOD SAW/CIRCULAR SAW/WOOD SAW /fire w13hp, 700mm SWING SAW/LOG CUTTER/ LOG BENCH SAW/TABLESAW/FIREWOOD CUTTING SAW/FIREWOOD SAW/CIRCULAR SAW/WOOD SAW /firewood cutter/firewood processor
1# This wood bench saw has been designed to combathardwoods. Featuring a 700mm tungsten tipped blade powered by a13hp petrol engine with manual or electric start. new and improvedsafety features to make it user friendly and so easy to use.
2# with pneumatic tires and a drawbar with ball hitch, so thatthe saw can be easily transported in the yard! Many competingmodels have only very small hard plastic rollers and are not likelyto move, let alone to move on soft ground!
3# The rocker can be widened to the left to get a larger contactsurface for the wood as required, with approximately a 20 inchextension is included.
4# On the right side of the rocker has a stop which allows youto cut your wood to a precise size. The stopper consists of a solidflat bar section and is completely stable. In many jigsaws only athin sheet-metal or plastic stop is used, which does not reallylong will bend or break quickly. You can use the attack to max. 56cm just saw.
5# The crackle finish is very durable and resistant. Thediameter to be sawn wood must not exceed 270 mm and must be atleast 25 mm. For safe operation and locking of the cut material,the saw has a grip handle lets you carry the wood to the sheet.
6# The Saw is delivered well packed in a wooden crate. For theinitial installation, it will take about 15-30 minutes. you have toget wheels mounted and clamped to the battery of the motor can befilled. before use, you still need gasoline and motor oil (1liter of 10W40 or 15W40).
7# New Log Clamp Fitted On Bench Handle For Maximum Safety
8# Full Safety Guards Fitted and CE approved
9# Two Solid Wheel Fitted For Moving Around
detailedspecification is as follows:
| Model | DSAW137 |
| Overall dimensions: | 1130x780x1250 mm |
| Engine | 13 HorsePower 390CC, 4 Stroke Engine |
| Blade | 700mm 28" x3.2mm X 64 Teeth Tungsten Tipped Blade |
| Max Speed Of Blade Is | 1440Rpm |
| MinimumCutting Diameter Of Wood: | 50mm |
| MaximumCutting Diameter Of Wood: | 270mm |
| Maximum LogLength Recommended is: | 1500mm |
| Drive | FullyAdjustable Engine Tensioner For Dual Drive Belts |
| N.W | 140KGS |
| G,W | 160KGS |
| Fuel: | NormalPetrol |
| Tank capacity: | 6liters |
| Oil Consumption: | 1.2 - 1.5 l/ h. |
| Availablecolors | Yellow,Green, red, orange, etc |
