High-speed wood cnc MAXI-S 1212
2016-12-19 09:17 Views:129
Price:
0.00 USD/Negotiable
Send Inquiry
Description:
High-speed wood cnc
this is a very accurate CNC Engraver. Suitable for Wood , plastic ,ACRYLIC and so on . Speed and fast .
High-speed wood cnc Suitable Materials Wood, Plastic, Aluminium, Di-Bond, Engraving Board,Fomex.Engineering plastics, marble, acrylic, perspex, PVC,Composite panel, Copper, Alloys, MDF, etc. |
| PARAMETERS |
| NO. | Discription | Parameter | | 1 | X-Y-Z Working Area | 1200x1200x120mm | | 2 | Table Size
| 1340x1540mm | | 3 | X-Y-Z Traveling Positioning Accuracy
| ±0.05/300mm | | 4 | X-Y-Z repositioning Positioning Accuracy
| ±0.04mm | | 5 | Table Size | T-slot Extrusions | | 6 | frame
| Cast Steel | | 7 | X, Z Structure
| Hiwin Ball Screw | | 8 | Y Structure
| Ball Screw and Hiwin Rail Shaft Linear Bearings | | 9 | Max. Power Consumption(Without spindle) | 1.2KW | | 10 | Max.Rapid Travel Rate
| 10000mm/min | | 11 | Max.Working Speed
| 6000mm/min | | 12 | Spindle Power Motor
| 1.5Kw self-coolant spindle | | 13 | Spindle Speed
| 0-24000RPM | | 14 | Drive Motors
| Stepper Motors | | 15 | Working Voltage | AC220V/50/60Hz (Option: 380V) | | 16 | Command Language
| G Code | | 17 | Operating System
| DSP System (Mach3 PC Software) | | 18 | Interface
| USB | | 19 | Flash Memory | 128M (U Disk) | | 20 | Collet | ER16 | | 21 | X-Y Resolution
| <0.01mm | | 22 | Software Compatability
| Type3 software, Wentai software, Artcam software | | 23 | Running Environemt | Temperature: 045
Relative humidity: 30%75% | | 24 | Packing Size | 1850x1850x1450mm | | 25 | Net Weight | 380KG | | 26 | Gross Weight | 500KG | | All parameters above subject to change without priornotice |
|
Contact Infomation
Send Inquiry
