Price:0.00 USD/Negotiable

Send Inquiry

Description:

laminating hot press
1.PLC control
2.Reducing labor
3.Shortening producing cycle of product

laminating hot press

The decoration paper, PVC template or wood slice ontothe wood-based panel (including calcium silicate board, particleboard, plywood and MDF)

Main features

1. Make use of PLC human-computer interface control, safety andreliably, and the pressure curve control accurately.

2. Hot-press frame with reasonable design is used with, iswelded using the carbon dioxide gas from the domestic well-known& good-quality stainless and process the three working-faces onPlano miller.

3. Adopts the secondary recycling control system for controllingthe temperature of top and bottom hot plate.

4.be matched the cupula conveyor for the foundation board,positioning accuracy. also can be matched automatic trimming,turning board for cooling, automatic stacking, inspection and soon

 

Technical Data

1. Finished Specification:    (8~40)×1220×2440mm                                      

2. Pressing Cycle:    According to technological request

3. Specific pressure:    12000kN

4. Unit workingpressure:    ≤40kg/cm2                                                    

5. Size of heatingplate:     1400×2600mm

6. Daylight opening:   280mm

7. Maincylinder(Diameter×stroke):     320×300mm 6 units

8.  Oil pressure of hydraulicsystem:     ≤25MPa                                                        

9.   Temperature of heatingplate:     ≤210

10.  Temperature control of heatingplate:    Temperature control meter by digitalsettingWith secondary cycling system

11. Temperature control precision of heatingplate:    ±1   (Upward and downwardheating plate controlled separately)   

13.  Working of loading device:    Beltloading

14.  Speed of loading device:   30m/min                            

15.  Control precision of positioning:    ≤2                                                             

16.  Drive mode of loading device:   Service drive

17.  Control mode of whole wire:    PLC

18.  Closing time of press:    ≤2.0s                                                              

19.  Lifting time of press:     ≤2.0s                                                               

20.  Pressing time of press:     ~1.5s                                                                

21.  Arrangement of energy:    0.24MW(20×104 kcal/h)

22.  Heating media of heatingplate:   Thermal oil (Boiler prepared by userself)

23.  Total power:    110kW

24  Arrangement of compressed air:   1.2m3/min  0.6Mpa

      (Compressed air prepared by userself)

25. Wind quantity of ash separator of brusher:   10000m3/h

 (Ash separator prepared by user self)

26. Net Weight:    110000kg

27. Size of the line(Length×Width×Height):     13000×13000×4200mm(Abovethe ground)