Description:
Automatic Edge Banding Machine2. ISO9001:2000 Approved
3. Frequency converter
4. Quality assurance
Automatic Banding Machine
(Automatic Edge banding machine )
.The machine is used for MDF, wooden board andshaving board.It can complete the process of feed workpiece, feedcoiled material, cutting end triming, triming unit, scraping unitand bulfing.It can achieve the level as same as foreign productsand the price is low.Its especially suit able for.
Function:
.End triming and triming unit adopt imported high-motor, it is highprecision, lower noise, long life, processing stability.
.Adopt imported frequency converter, action is sensitive andreliable and with good stability.
Main parameters:
304 | Parameters |
Rolling edge-enveloping belt thickness | 0.4-3 mm |
Solid wood edge-enveloping belt thickness | 1-10 mm |
Rolling edge-enveloping belt height | 13-55mm |
Workpiece thickness | 10-50 mm |
Minimum width | 150 mm |
Minimum length | 160 mmWood180mm |
Delivery speed of workpiece | 16 m/min |
Air pressure | 0.7 Mpa |
Voltage | 380AV |
Frequency | 50Hz |
Edge-trimming equipment motor | 0.50kW×212000rmin200Hz |
Edge-removing equipment motor | 0.70kW× 12000rmin200Hz |
Polishing equipment motor | 0.25kW×22800rmin 50Hz |
Rubber axle motor | 0.20kW1400rmin50Hz |
Squeezing wheel electrical motor | 0.18kW1400rmin50Hz |
Workpiece delivery motor | 2.20kW1400rmin50Hz |
Heater | 1.70kW |
Total power capacity | 7.18kW |
Machine tool dimension | 4600×800×1800 mm |
Weight | 1500 kg |
