Description:
YX 1200 with auto feeding, cleaning, vacuum unloading and trimmingetc. 1200/pcs board per day.Using Japanese or Germany parts.1. Total pressure : 12000 KN
2. Diameter of cylinder and QTY: φ320mm QTY: 6unit
3. Diameter of lift-cylinder and QTY : φ63mm QTY: 4 pieces
4. Size of heating plate system: 1400mm×2600mm
5. Max Operating: about 200mm
6. Motor: 22 KW 0.75KW
7. Capacity(22 hours a day) : 1200 pieces perday
8. PLC control system
1) Pallet Lifter
When the fork clip load the pallet boardinto the lifter , it star to push board one by one. Itwas control by photoelectricity switch.
2) Pusher & conveyor
Belt conveyor transfer the board into cleaner.
3) Cleaner
By using brush and vacuum to cleaning the dust of the boardsurface.
4) Board Transfer System
It will pick up the clean board on the top of paper
5) Paper Stock frame
Stock the roll paper
6) Belt Feeding Table
Belt feeding table will feed the board with paper automatically.The belt design for high temperature as well.
7) Main Press
By using additional thicker parts to promote the strength ofbody. Extend the lift time.
8) Vacuum UnloadingSystem
Easy way to unload the finished products, less damage as well.It was brand air cylinder.
9) Conveyor for trimming andchecking
When the board passing this position, it will auto trimming theleft and right side. Then the trimming system will trim the resttwo sides. After finish it, the cylinder will pick up the board andto check the bottom side of finished products.
10) Stock lifter with two position(option)
We supply two position of stock pallet A&B
