Description:
1.A total of 15 LED Products;2.Material: TPE.
3.Charging time: battery can be fully charged within 2-3hours.
led flare traffic warning lightpicture
Detailsdescription of led flare traffic warninglight
1.9 flashing models
2.15 pcs LED and with magnet base
3.10 year shelf life
Specification of led flare trafficwarning light
| Size | 10.5 x10.5x 3.5cm high |
| Weight | 6.7oz. (190 g) with battery |
| Battery | 1 CR-123 Lithium battery |
| Shelf-Life | 10 Years |
| Buoyancy | Positive (floats); can attach weight |
| Op. & Storage Temps | Fahrenheit: -40/-40 to 212/248 deg F |
| Celsius: -40/-40 to 100/110 deg C | |
| Emission Source | 360 degree LED array: solid-state; no filament |
| LED Light Colors | Red, amber, blue, green, white, infrared (IR).Custom colorsavailable. |
| Daylight & Night Visibility Ranges | Night: visible to 900M (3, 000 ft) on road or water, 10 miles (16km) from air |
| Day: visible to 300M (1, 000 ft). | |
| Housing Color & Material | Polymer |
| Water Depth Rating | 80M submersion |
| HAZMAT | Hermetically sealed; intrinsically safe |
| Chemical | Contains no hazardous chemicals, Withstands exposure topetroleum-based fuels |
| Switch Type | Push Button |
| Approvals & Certifications: | Complies with U.S. DOT (FMCSA) 49 CFR E 392.25 &393.95(g). |
| MUTCD Type A (flashing) and Type C (solid on). | |
| Designed to meet MIL-SPEC/MIL-STD 810 for shock, vibration, andwater-resistance. |
A. With120-240V wall charger and12-24V car charger
LIbattery in recharge series capacity: 700mAH/3.7V
ACcharger: input voltage 100-240V, output voltage: 5.5V, outputelectricity 450MA
Carcharger: input voltage 12-24V, output voltage: 5.5V, outputelectricity 450MA
Chargingtime: battery can be fully charged within2-3hours.
B.Howto Charge it?
1.Put the light on ground, back side is upturned.
2.Take out the ellipse charger, put the charger onto the light asphoto shows below, there has a and mark on both of light andcharger, face to and to -.
3.Connect the USB wire with the ellipse charger, now you can chargerthe light through the computer USB plug.
4.If you want to charger the light through AC, please connect theAC charger.
5.If you want to charger the light through CAR Plug, take out theAC charger and connect the CAR chargerinstead.
When it is fully charging, the light on ellipse charger is GREEN,and when it is full charger, the light on ellipse will turnRED.
Details pictures of led flare traffic warning light
