Specifications:

• Obstruction light for a wide variety of cranes used in Harbors,metallurgies, Towers (Telecom, GSM), Smokestacks, Buildings and anyother potentially hazardous obstructions to air traffic with asteady burning red safety light Standard:Compliant to theICAO(Aerodromes Annex 14) and FAA-L810

Description:

LS310C Low intensity dual aviation obstruction light

Obstructionlight for a wide variety of cranes used in Harbors, metallurgies,Towers (Telecom, GSM), Smokestacks, Buildings and any otherpotentially hazardous obstructions to air traffic with a steadyburning red safety light

Specifications

Description	Parameter
Standard	Compliant to theICAO(Aerodromes Annex 14) and FAA-L810
Vertical degree	≥10°
Light source	High quality LED
Horizontaldegree	360°
LED color	Aviation red(Othercolor can be customized)
Flashing rate	30FPM(20-60FPM/
Operatingvoltage	AC110-240V/ DC48V(Other voltage can be customized)
Flashingduration	150±20ms
Powerconsumption	6W(Steadyburning)
LED life	≥80, 000h
Intensity	≥32.5cd
On/off level	500Lux
Operatingtemperature	-40˚C ~ +70˚C
Relativehumidity	10% ~ 95% (nocondensing)
IP Protection	IP65
Material	base::Aluminum alloy,Housing: PC
Weight	4.5kg

Functions & Features

• Use Fresnel lens, high utilization of light, valid keepinglight beam in the scope as required.
• based on LED technology, low power consumption, and highefficiency.
• Lamp housing –Polycarbonate, with good anti-impact strength,thermal stability, high transmittance.
• Aluminum alloy base with the advantage of light weight andcorrosion resistance.
• G3/4"pipe is available, ease of mount.
• with stainless steel wire which is used to secure the unitagainst falling in operation, and ease of mount.
• Built-in micro monitoring controller unit, when and if theservice light fails the controller switch on the standby lightautomatically.
• Built-in photocell can switch ON/OFF the light at dawn and dusk(optional).
• With outputting alarm signal(optional).
• Extremely Reliable - Major Maintenance Cost Saving.

Mounting dimension(unit: mm)& Wiring Connection

Installation and operation

• Please check the supply voltage does comply with rated voltageof the lamp.
• Screw the lamp on G3/4`pipe of mounting bracket, which shouldbe fixed on a smooth surface with enough mechanical strength. Oryou can select our mounting bracket: PJ024, PJ005. Note thatinstallation is fixed and reliable, so as not to fall.
• If the lamp is with photocell, please do not put photocelldirect to nearby light. Meanwhile ensure that the photocell is notobstructed by nearby object.
• Open the connection box and connect the power wire, signal wireaccording to marking. Then remount the connection box.
• Switch on the power after check up. The light begins towork.

Adjustment of flashing rate

• Switch off the power.
• Unscrew the screws of housing and base.
• The flashing rate and adjusted code, please see as following:

• Screw the screws of housing and base.
• Power on, the light will work as your setting.

Dual light/Two lights switchover

• Switch off the power.
• The work model and adjusted code, please see as following:

• Power on, the light will work as your setting.

Production Flow Chart

Product File

• Model: LS310C
• Applications: Applied to iron towers(electicity, telecom,microwave, etc), chimneys(heat-engine plant, coking plant, chemicalplant), high buildings, large-scale bridge.large-scale portmachinery, large engineer machinery and wind turbines which needthe warning for aircraft machines.
• Standard:ICAO Type B low intensity FAA L-810 CAAC L-810
• Certificate:
• Improve Records:None
• Fault Records: None
• Quantity/Delivery Day: 5pcs/5Days