Description:
T8 Tube With Battey Pack LED Emergency Light1) 85-265VAC
2) 3Hours Duration
3) 50% or 100% Emergency Light Up
4) PF>0.95
IES File & Dialux SolutionsAvailable!
T8 Tube With Battey Pack LED EmergencyLight
GENERAL
1. The emergency battery packs are designed to work with the10W, 18W and 22W LED Lighting.
2. The emergency duration is up to 3 hours.
SPECIFICATION
1. Included in the kit:
BPI-LT7-810-EN3: Ni-Mh battery pack 3500mAh and DF168Finverter.
BPI-LT7-818-EN3: Ni-Mh battery pack 5500mAh and DF168Finverter.
BPI-LT7-822-EN3: Ni-Mh battery pack 6500mAh and DF168Finverter.
2. Input Voltage: AC 100-305V/50-60 Hz.
3. Charging Current: 150mA.
4. Charging Time: BPI-LT7-810-EN3>24 hours,BPI-LT7-818-EN3>48 hours, BPI-LT7-822-EN3>72 hours.
5. Emergency Duration: 3 hours.
6., MAX Charge Voltage: 15V.
7. MIN Discharge Voltage: 10V.
8. Working Temperature: -20-50
9. Safety Standard: GB/T17945-2000.
NOTES
1. Zero load forbiddened.
When testing the emergency lighting function or the chargingfunction, there must be LED tube connected.
2. Live line (L) and Zeron line (N) must be connected to mainpower directly, without any switch.
3. Switch (S) just control the main power, do NOT affect theemergency lighting.
4. In the emergency lighting mode, all the indicator lights willbe OFF.
5. The green indicator signal is on when the inverter is innormal working status;
the indicator is on the left side of the juction box, and if anyrelocation of the battery pack is needed;
the indicator should be removed and placed right beside theemergency light properly.
MAINTENANCE
The inverter is a key part to control the charging, dischargingand driving the LED tube in emergency.
All the wires have to be connected properly according to thediagram as above.
After installation, the battery pack has to be discharged everythree months, to extend the life time of the
battery pack. Ordinary maintenance is necessary.
Technical Specifications :
PhysicalSpecifications
| Length | 600mm | 1200mm | 1500mm |
| Weight | 212g | 360g | 441g |
| Housing | Aluminum base PC Cover | ||
| Lens | Milky/Clear | ||
| Tube Diameter | T8 | ||
| base Type | G13/R17d | ||
| Work Environment | Indoor use (applicable for dry environment) | ||
ElectricalSpecifications
600mm | 1200mm | 1500mm | |||
| LED Quantity | 72LEDs | 120LEDs | 120LEDs | 152LEDs | 152LEDs |
| Power Consumption | 10±1W | 15±1W | 18±1W | 18±1W | 22±1W |
| Input Voltage | 100-305VAC | ||||
| Power Factor | >0.95 | ||||
| Light Source | 2835 SMD LEDs, more than 21LM each | ||||
| Operation Temperature | -20~50 °C | ||||
OpticalSpecifications
600mm | 1200mm | 1500mm | ||||
| Power Consumption | 10W | 15W | 18W | 18W | 22W | |
| Lumens | Clear | 910±10%lm | 1425±10%lm | 1800±10%lm | 1800±10%lm | 2310±10%lm |
| Milky | 850±10%lm | 1340±10%lm | 1690±10%lm | 1690±10%lm | 2160±10%lm | |
| Luminous Efficiency | Clear | 91lm/w | 95lm/w | 100lm/w | 100lm/w | 105lm/w |
| Milky | 89lm/w | 89lm/w | 94lm/w | 98lm/w | 98lm/w | |
| Color Temperature | Warm White | 2800K-3200K | ||||
| Natural White | 4000K-4500K | |||||
| Cool White | 6000K-6500K | |||||
| CRI | >80 | |||||
| Beam Angle | 120 Degree | |||||
PhotoShow:
BatteryPack:
