Description:
Four modes Solar lantern light1.DC Solar 6V/1.5W
2.USB Socket
3.4 light modes
4.CE ROHS Approved
Four modes Solar lantern light
Solar Panel: 1.5W/6V Poly SolarPanel
Battery: 4V/4000Ma Lead AcidBattery
Light source: 1W x 1 piece superhigh brightness white LED
Hours of light with fullbattery:
4 light Modes:
Bedlight: at least 100hours
low: at least 12 hours
Medium: at least 6hours
High: at least 4hours
Input : Sunlight or DC
Output : Can charge mobile phoneby USB
Led emergency light solar Features&usage
Ideal for camping, cooking,actitiies indoors & outdoors
Other functions: chargeable by220/110V voltage with AC/DC adapter
Charging time: 4 hours by AC/DCadaptor and 9 hours by Solar.
New : with USB for chargingmobile phone
With overcharge and dischargeprotections
LED bttery capacityindicator
Ledemergency light solar photos:
WARNING
Please read these instructions before using, and keep for futurereference.
1. Please insure that the battery has been fully charged beforeusing, and charge it in time if
the light is dim.
2. Charge the unit regularly, to insure the best performance of theportable lamp.
3. The power will reduce when the lamp is used at temperature under0 C or above 40 C.
4. Do not disassemble the lamp unless you are a certifiedtechnician.
OPERATINGINSTRUCTIONS
1. Put the outer solar panels at a sunny place, make sure solarpanel is not blocked by
anything.
2. AC mains adaptor is an optional accessory. When the unit ischarged by AC mains
adaptor, the charger should be inserted into the "DCIN", and plugin AC power. During
charging process, LED is red; when charging is finished, LED turnsto green. It is normal
that the charger may be a bit hot while charging.
3. There are four modes: Mode 1 (pressing switch once) is 25%brightness; Mode 2
(pressing switch twice) is 50% brightness; Mode 3 (pressing switchthree times) is 75%
brightness; Mode 4 (pressing switch four times) is maximumbrightness.
Pressing switch five times will turn off the unit.
4. 4-head USB phone charger is used to charge cell phones, onlycharge for suitable cell
phones (Note: iPhone 5 cannot be charged by this unit.)
5. To use the reading lamp for reading, please connect the readinglight to USB socket.
TECHNICALPARAMETERS
1. Material: transparent plastic AS/ABS.
2. Battery: Valve non-maintained lead acid battery, 4V, 4AH.
3. Lamp: 1W high brightness LED.
4. Solar panel: 6V, 1.5W.
5. Charge time: 10 hours charged by AC current, or 22 hours chargedby solar energy.
6. Illumination time: Mode 1: 20-25 hours; Mode 2: 15-20 hours;Mode 3: 13-15 hours; Mode
4: 10-12 hours.
MAINTENANCE
1. Use cotton cloth to wipe the outside surface of unit, do not usechemical solvent.
2. only use the battery designated by the manufacturer.
3. Do not disassemble the unit unless you are a certifiedtechnician.
