Description:
7 years manufacture expereince in this industry.All material made by ourself
state-owned enterprises
Features :
Different thickness of Aluminium plate is available : 1mm, 1.5mm, 1.8mm ,2.0mm, 2.5mm and 3mm .
Differentgrade of reflective film is available : High-Intensity ReflectiveFilm , engineering grade sheet, supper grade sheet.
Customizeddesign and size .
Circular,Octagonal, Square, Triangular, and more sharp avalaible
Traffic Signs FAQs
What are the rules for reflective signs?
· High Intensity or Diamond Grade sheeting will be required for all traffic signs.
· Engineer grade signs are acceptable for parking signs.
How long do traffic signs really last?
Much depends on your climate and if the sign is south facing. Engineer grade signs generally have a service life of at least seven years. High Intensity and Diamond Grade signs can last 9 years or longer.
What liability do I have if my sign is fading and no longer reflective?
If your parking lot and roads are "open to public travel", your signs should follow MUTCD standards. They need to meet the same levels of retroreflectivity that are required for traffic signs on public highways and roads. Off-street roads that are built or maintained privately generally do not need to follow these guide lines. Installing the proper reflective signs is best way to protect yourself from legal action .
How deep should I pound in my channel post?
Channel post should be pounded 18" to 30" into the ground depending on length of post, soil conditions and how strong you are feeling.
Are there any color restrictions on your custom signs?
No. The technology of today allows us to print almost anything you can design on a traffic or parking blank. Custom sizes and shapes are available as well.
I want to put "Buckle Up" safety message stickers/plaques on the back of STOP and YIELD signs in my City. Is this permissible under the MUTCD?
No. Section 2B.10 of the MUTCD states that "No items other than inventory stickers, sign installation dates, and bar codes shall be affixed to the fronts of STOP or YIELD signs, and the placement of these items shall be in the border of the sign. No items other than official traffic control signs, inventory stickers, sign installation dates, anti-vandalism stickers, and bar codes shall be mounted on the backs of STOP or YIELD signs. No items other than retroreflective strips (see Section 2A.21) or official traffic control signs shall be mounted on the fronts or backs of STOP or YIELD signs supports." The reason is that "Buckle Up" and other such messages detract from the motorist''s recognition of the STOP sign as a stop sign.
