Description:
Sensor Emergency Light1.Motion Sensor Control
2.Ceiling Light
3.Emergency light
4.Rechargeable
Outdoor Rechargeable LED EmergencySensor Light, Motion Sensor LED CeilingLight
Quick Technical Date:
Model No. | BS102 | BS102C |
Description | LED emergency light | |
Operating voltage | AC/20v~240v;AC / 100v~130v | |
Power | 3w | 4.5w |
Frequency | 50~60Hz | |
Type of Light Source | LED, 28LED | LED, PIR Light 66LED |
Power Source | ≤5w | |
Delay time | 30s ± 5s | |
Motion light control | yes | yes |
Motion control 30%light | no | yes |
motion sound light control | yes | yes |
motion sound control 30% light | no | yes |
Light sensitivity | illumination below 5Lx, the sensor light working | |
Sensing Angle | 360° / ≤140°(one Angle) | |
Working Temperature | -25°C~55°C | |
discharging time | ≥120min | ≥90min |
size | Φ245×40(mm) | Φ255×45(mm) |
Install sketch map in stairscase room:
Note:
1. The enclosure of BS102 and BS102C is advanced flame-retardantmaterial(ABS), and it is full compliance with oxygen index morethan 32.
2. BS102 has two function based on the sensor, motion light controlAND motion light sound control.
3. BS102C function same to BS102, In addition, BS012C be stand by30% lighting when no
detect.
4. There are three battery in the BS012 light and one Lithium ionbattery in theBS012C
light. In usually the light works as sensor light, automaticallycharging up for battery, when environment illumination below 5Lx,the sensor light is auto ready for working, toBS012C, 66 LEDlighting for moving people, and auto turning off after delayingtime.The sensor light using convenient, safe & stability, andnot be interfered by noise and soon. When power cutting, the lightwill become an emergency light (28LED lighting in all along). Thebattery working time more than 3 hours one time;toBS012, When theblackout, the light will become a emergency light (lighting for allalong). The batteryworking time more than 4 hours onetime.
5. There are three indicator lights and one test press-buttonon the surface:Green indicator light: lighting, it is meaning thatthe electricity AC220V is working(102C works as a sensor light).Red indicator light: lighting, it is meaning that chargingup forbattery. Yellow indicator light: Debug indicator light, lighting,it is meaning that the light source or battery have problem, shouldbe repaired.Test press-button:pressing the button, the light willworking as a emergency light.
Wiring:Red line:Live wire;Blue line:Neutralwire
