Description:
t8 fixture led1.240 VAC /SAA/CE/UL
2.PF: 0.95-0.99
3.Ballast and starter compatible
4.Full Size
t8 fixtureled 9w-18w 120lm/w Aluminium back PMMA cover ce rohs
Features
1.led tubes no remove ballast CE/SAA
2.lum flux:1650lm
3.light efficieny:95lm/W
4.illuminance(1.5m):>200lux
5.3yrs warrantyComparing with traditional fluorescent tubes, ourLED tube can save 50% electricity cost. For example, our 8W, 10W,18W, 20W LED tubes can replace 16W, 20W, 36W and 40W traditionalfluorescent tubes. LED tubes do not need ballast or starter. Itsave another 8-13W.
1200mm 20W smdtube t8 led tubes no removeballast
Specification:
Model NO | JX-T8-120CM-18W-LM |
Input Voltage | AC 90V-260V |
Operating Frequency | 50-60Hz |
Power Consumption | 18W |
Light Efficiency | 90LM/W |
Diameter | 26.5MM |
Length | 1213mm |
Light Source | Low Power LED |
LED Brand | TAIWAN Epistar LED |
Type of LED | SMD 3528 Or 5050 Or 3020 |
Illuminance | ≥200LUX(1.5metres) |
Color | Warm White Or Pure White Or Cool White |
Color Temperature | 2800-3200K, 5500-6000K, >6300k |
Beam Angle | 120deg |
Power Supply | Built-in Power Supply |
Working Temperature | -20 to 50degree |
Power Factor | 0.9-0.99 |
Life-span | More than 50, 000 hours |
Certificate | CE& ROHS & PSE |
Material | aluminum alloy PC cover |
Socket | G13 |
Unit LED intensity(lm) | 6.5-7lm |
LED Quantity | 324PCS SMD3528 |
LEDS LumenAttenuation:
Operating time(hours) | Lumen decrease(%) |
5, 000 | 2.4 |
10, 000 | 5.2 |
20, 000 | 11.3 |
50, 000 | 24.5 |
Advantages:
1.LED tube has various colors for customers tochoose. It can be available in various in single color or RGBcolor.
2.We have the R&D department to support and cansupply the products according to your design and requirements.
3.Energy saving , saving 50% than the traditionallights at the same brightness.
4.Inner high efficiency(95%)heat protection system,with the latest high efficiency and constant currency driver,making the products can work under unstable voltage.
5.Professional circuit design, each LED can workseparately, thus it can avoid the influence caused by a brokensingle LED.
6.Anti-electric wave, no RF interference.
Application:
1. Instead of the indoors ceiling light
2. Factories, Offices, School, Universities, Hosptial
3. Conference, Meeting room, Show Room
4. Commercial Complexes
5. Super-markets
6. Residential, Institution building
Installation
The same size tube can be installed on to thecorresponding lamp holder directly before taking
down fluorescent lamp starter.
1. LED tube can be directly installed into T8 orT10 bracket(take down fluorescent lamp starter);
2. LED tube light apply to inductive lightholder. Electronic ballast fluorescent tube can’t be replaceddirectly, should take down electronic ballast.
