Description:
all in one solar garden light esl-071.anti-dusk nano-coating pv module
2.GEL deep cycle battery
3.IP68 PHOCOS controller
:
All in one solar garden lightesl-07 | |||
Name | Specification | Quantity | Parameter |
Sola panel | 280W/24V | 1 piece | Polycrystalline, 156×156mm, 72piece. Vm: 36.145V,Im: 7.775A,Voc: 44.949V,Isc: 8.218A
Size:1956×992×50 with 90cm wires,MC4 Connector. Weight:27KG
Warranty: More than 90% output power in 10 years ,80% output power in 25 years. The product have passed TUV, IEC, MCS etc certificate. |
Light source | LED80W/24V | 1 piece | Single Integrated Power (80W), Woking Voltage DC24V,General luminous:8000lm, LED Luminous Efficiency:100lm/W, Center illuminance:14lx,Ra>80,Color temperature:2700~7000, Protection Grade :IP65,Working life >50000,
It can woke more than 10 years in accordance with 12 hours a day. Lamp shade is Die-casting molded with aluminum alloy, and its face is UV-resistant and corrosion resistant . No bad glare; No Strobe; Start without delay.Low maintenance cost.
Production Size :720×320×172mm ,Weight :9.56KG Packing Size:775×345×258mm,Weight:12.2KG |
Controller | 24A | 1 piece | PHOCOS CIS Series,12V/24VAutomatic identification , light control and time control,Protection Grade IP68 |
Battery | 12V/150AH | 2 piece | Gel Battery that dedicated to solar energy,can be used recurrentlymore than 400 400 times in 100% discharge cases.
Advantage:the small selfdischarge rate ,the better deep discharge, Top charge acceptance, large capacity, strong start in low ,the good shock resistant and Antitemperature charge Production
Size:483×170×240mm,Weight:44.5KG Packing Size:506×193×290mm,Weight:46.4KG 4 The two Battery is used in series in this collocation . |
Pole and other steel fitting | 10M | Set | Best steel Q235 or Q345; hot dip galvanized and paint coated. Top diameter:Φ82mm,bottom diameter: Φ220mm,thickness:4.75mm. iron plate is rolled into type for one time
.Flange plate:400×400×20mm Standardized parts can replace each other for high efficiency and precision, which also can increase the packing quantity and reduce transport cost . Battery body are welded after 2mm plate stamping molding |
Wires harness | -- | 1 piece | With the special connector ,standardization, substitutability , high installing efficiency,saving cost . Wire harness can be designed according to different lamp type . |
others | baseplate Φ20 steer rod , standard component and so on | ||
Conditions | Voltage of system: 24V,working time: 10 hours , Best work temperature -20°C~50°C | ||
Packing Quantity | 70set/40HQ | ||
Description of Design
1.This lighting system is suitable for area which peak sunshine last for five hours, three continuous rainy days, different system
be designed according to your specific project requirements and climate conditions.
2.Sun energy power the solar lighting system, it can be affected by sunlight exposure to solar panels,Please avoid tall buildings
or other objects that can block the panels when install the lamp.
3.We suggest that you should clean the dust on the solar panels every half of one year, to ensure its beauty and the solar energy
absorption, but don''t rinse area from the bottom up.
4. Battery is placed on the top of the pole, it’s good for battery heat-dissipation, shortening cable length, reducing
pressure drop, easy installation & anti-theft.
Product obtained CE TUV SONCAP and MCS certificate
Application
Road, street, pedestrian lane, squares, schools, parks, gardens, residential areas, lant and other places of outdoor
lighting.
Parameter of light, battery, controller, solarpanel
Pleasecontact me at your free time if you are interested in ourproducts
