Description:

HB 40W50W  induction lamp for explosion-proof light

Type: HB-FB002

Category: Explosion-proof light

Size: 300x260X265  300x260X275

Lamp source: HB induction lamp

Power: 50W

IP grade: IP65

Material: Lamp fixture die-casting , fashionable and elegantsurface.

Applicable Places: Chemical, refinery.

Feature

1, Lamp fixture are eplosion-proof and dust explosion-proof,suitable for the explosive dangerous site.

2, Lamp fixture die-casting , fashionable and elegantsurface.

3, Polyester spray surface and dust resistant.

4, Lamp fixture designed with two cavities, lamp source and lampbase are separated .

5, Cable sealed in the inner part to avoid the twist of wire. Innerpart use rubber seal and make sure the resistant of water proof.
6, installation of wall mounted and ring hanger type suitable forhanging and wall mounted and ceiling installation .

HB induction lamp-Technical specification

1.The main frequency output is210KHZ                                   
2.Power frequency is50/60HZ                
3.Passed the standard of EMC Eectromagnetic Radiation test and EMIConduction Test   
4.Passed one million times switch on-off test
5.The distance between ballast and tube should be less than10meters
6.With the standard of GB19510.4-2009, GB19510.1-2009,GB17743-2007, GB17625.1-2003and GB/T15144-2009, QB/T2871-2007
7.Wide Voltage, overcurrent and  overvoltage protection;
8.Ten years manufacture demand and theoretical design
9.Provide five years quality warranty
Working environment temperature: -35°C-70°C
Working voltage range: 1, DC 12V 24V 36V    voltagerange is -25%
                   2, AC 120V 220V 277V 347V 480V   voltage range: -15%