Description:
1.LED: 100WSWC photography lighting W106W2.Max 10000 Lumens
3.Compact al-in-one design
Archon Waterproof 100meters MultifunctionRechargeable Torches Flashlight/UW Photography LightW106W
LIGHT FEATURES:
♦ 100 Watt high lumens
♦ Up to2 hours continuous burn time.
♦Positive ON/OFF switch
♦Screw-on rear cover
♦Video glass reflector(no hot spots)
♦ Wideangle refector
♦Lightweight
SPECIFICATIONS :
100 WSWC LEDChip
♦Total lumens:10000
♦Correlated colortemperature:5000K
♦ Rated median life 1 hoursON /15 minutes OFF:1000 Hours
♦ Warm-up time to 90% of ratedoutput:10 seconds
♦ Start-up time to 90% of ratedoutpu:5 seconds
100 WSWCDiscovery Ballast:
♦Input voltage:18V to26V
♦Shut down time:3secods
♦Ballast reset time aftershutdown:10 seconds
Weight ofunit:
♦On land 800 grams loaded withbatteries
♦In seawater 750 grams(withbattery pack)
Dimensions:
♦Length 300 mm
♦Width 76 mm
Operatingdepth:
♦Each unit is pressure tested to330ft(100m)
♦Will withstand pressure at500ft(150m)
Fulldetails:
1.Model:archon10000 lumen underwater 100meters led diving torchW106W
2.LED:100WSWC .Max 10000 Lumens.
3.Colortemperature: 5000k
4.MaxRuntime: 2 hrs.
5.Threeoutput levels. High>Middle>Low
6.Reflector:without reflector, for underwater photographing only
7.Bodymaterial: Durable aircraft-grade aluminum
8.Angleof light beam: 120°
9.Operationvoltage: 18V to 26V.
10.Lens:8mm Polycarbonate Board
11.Surfacetreatment: Premium Type III hard-anodizing.
12.Color:Black
13.Battery:Li-ion batteries pack
14.Withbattery over-discharging protection, polarity reversingprotection
15.Size:300(length)*76mm (dia. of head).
16.Weight:1772 grams (w/battery and charger)
17.Operation Instruction: Successive switching ON-OFFwithin two seconds to cycle through high, Middle, Low
FAQ
1. I do not use thesehigh-end and multi-function flashlights a lot, what should I payattention to in use?
.Battery
a. Battery type. Please use the specified battery type accordingto your flashlight user manual, and if you use rechargeablebatteries, please use those with protected circuit.
b.Battery replacement to ensure performance of the flashlightand safety, please replace with same brand, same type and samecapacity batteries and make sure to insert batteries correctly withthe positive end pointing to the light assembly.
c.Please take out batteries before long time storage to avoidbattery leakage which may damage the flashlight components andparts.
.Waterproof O-ring andlubricant
a.Right amount of lubricant will be applied on the flashlighto-rings before shipping out in order to ensure smooth operation andextend the lifetime of the o-rings and for better waterproof aswell.When there is little or no lubricant on the o-rings and it''sdifficult to twist between threads, please apply lubricant on theo-rings in time.
b.The o-rings can be worn out due to ling time use, pleasereplace with spare o-rings attached in the package.
.MaxOutput
When the light is at Max mode, there is heat coming from batterydischarge, drive circuit and LED, the flashlight head will becomparatively hot, please be cautious of touching it;To protect thebattery, circuit and LED so as to extend the lifetime of theflashlight, we do not recommend that you run the light at max modecontinuously for more than ten minutes.
2.I could not turn on thelight normally or it flickers, how to deal withthis?
a.Check your battery:If the light can not beturned on it flickers, please check and see if the battery is usedup and replace with a new one.
b.Clean the contact end and electricity conducting surface:Ifthe light still can not be turned on after replacing a new battery,please check if there is dust on the positive or negative end, oron the electricity conducting surface, if so, please use a cleancloth to clean the surface.
c.If neither of the above solutions works, please contact yourdealer and follow the warranty procedure to repair/replace yourlight.
