Price:Negotiable

Send Inquiry

Description:

Solar led light
Super bright LED
Deep crycle GEL battery
Germany phocos controller, IP68
High efficency solar panel

SOLAR LED LIGHT 

Autonomy/rainydays backup solar ledlight

Solar ledlight from China

 

 1.SPECIFICATION:

Name	Specification	Quantity	Parameter
Solar panel	280W/24V	1 piece	Polycrystalline solar cell,156x156mm, 72 piece. Vm: 36.145V, Im:7.775A, Voc: 44.949V, Isc: 8.218A Size:1956x992x50mmwith 90cm wires, MC4 Connector. and  Weight:27KG Warranty: Morethan 90% output power in 10 years .and more than 80% output powerin 25 years. The product havepassed TUV, IEC, MCS etc certificate.
Light source	LED80W/24V	1 piece	Single Integrated PowerLED(80W), Woking Voltage DC24V, General luminous:8000lm, LEDLuminous Efficiency:100lm/W, Center illuminance:25lx, Ra>80,Color temperature:2700-7000K, Protection Grade :IP65, Workinglife ≥50000hours. Lamp shade isDie-casting aluminum, and its face is UV-resistant and corrosionresistant . No bad glare; NoStrobe; Start without delay .Low maintenance cost .
Controller	20A	1 piece	PHOCOS CIS Series,12V/24VAutomatic identification , light control and time control,Protection Grade IP68
Battery	12V/150AH	2 piece	Gel Batterythat dedicated to solar energy. For the solar energy street lampthat in simple circulatory system. And  its  advantage isthat :the small self -discharge rate , the better deep discharge,Top charge acceptance, large capacity, strong start in low , thegood shock resistant and Anti-temperature charge Production Size: 483x170x240mm, Weight :44.5KG
Pole and other steel fitting	10M	Set	Material:steel Q235 or Q345; hot dip galvanized and powder coated. Solar panelbracket is consist of Angle iron and Flat iron. Square tube isassembled by bolt , any section is made with mold. With highefficiency and precision , standardized parts can replace eachother and the same time increase the packing quantity and reducetransport cost . Batterybody arewelded after 2mm plate stamping molding Lamp arm isconsist of welded tube and iron plate.
Wiresharness	--	1piece	With the specialconnector , standardization, substitutability , high installingefficiency, saving cost . Wire harness canbe designed according to different lamp type .
others	baseplate,steel rod, standard component and so on
Conditions	Voltage ofsystem: 24V, working time: 10 hours/day , Work temperature-20°C -50°C
PackingQuantity	65set/40HQ

 

 2. Description ofdesign

1. This system configuration is suitable for area that peaksunshine for five hours, three continuous rainy days. Systemconfiguration can be designed according to customer''s specificproject requirements and climate conditions.

2. The energy of Solar street lighting is form solar radiation,Whether the sunlight that exposure to solar panels is abundant ornot directly affect lamp lighting effects, so solar panels canexposure to sunlight at any period of time , so when Select whereto install the lamp, you should avoid tall buildings or otherobjects that can block the panels.

3. In order to ensure its beautiful characteristic and itsability that receive better solar radiation, we suggest that youshould clean the dust on the solar panels every half of one year ,but don''t rinse area from the bottom up.

4. Battery is placed on the top of the pole, and it’s good forbattery heat-dissipation, shortening the length of the cable,reducing pressure drop, easy installation & anti-theft.

 

3. Product obtained CE TUV SonCAP and MCScertificate application range

The road, City Road, Pedestrian Lane, Squares, Schools, Parks,Gardens, Residential areas, lant and other places of outdoorlighting. 

 

 4. Street lightsimulation

   ***************************************************************************************************************************

 

1. LEDDescription

   LED lamp shade is a transparent shade and madeof polycarbonate plastic injection molding material, high strength,good light ; using LED as the light source, and LED is lightemitting diodes, has the characteristics of high efficiency andlong life.At present, the lamp is shaping up as a mainstreamlighting products of new generation. 

    Using vacuum coating launcher ; high purity aluminumreflection cavity, light shell and heat dissipation body ; highstrength of tempered glass cover ; high-power LED light source ;efficient constant - current source. 

    Use intellectualproperty rights to encapsulate the single integrated high power (80w) LED light source, applying the unique light source design ofmultiple single chip integrated single-mode , and choose importedhigh brightness chip;  

 

 

2. Battery Description

    Gel battery is able to bearoverfull charge or overfull discharge, able to bear shaking, shockresistance, Long storage life. High quality alloy plate grid andunique electrolyte formula, Delicate and perfect processing andmanufacturing technology, Make the battery has a large capacity,good deep discharge performance, charge acceptance ability, lowtemperature starting ability, low self-discharge rate, Goodperformance of resistance to temperature change, , long lifecharacteristics and so on. Security seal structure, no need addacid or water to maintenance it, Does not leak acid, No acid mist,Environmental pollution free.

 

Storage batteryis gel deep cycle discharge type, apply to frequent load changes,harsh environment temperature conditions. inside a speciallydesigned grid to ensure the reliability of the depth of dischargecycle, under this 100% discharge circumstance, could recycle use it400 times. Used for solar street lamps and other light cyclesystem, could guarantee the cycle life of more than 2000times.

  

3. Controller Description

CIS controlleris special designed for solar street light, provide perfect,multiple protection for solar street lamps’ electrical systems, andthrough good control strategy, effective extend the system’s powersupply time.
*protection grade: IP68, effective dust-proof and water-proof
*sturdy and durable aluminium alloy case, anti-corrosion
*four stages charge control(main charge, powerful charge,equalizing charge, float charge)
*Single and double street light output contro l flexible
*infrared remote controller (CU) set, simplicity and convenienceoperator 
*LED status indicate
*at night all the time, morning and twilight double timelight-operated/time control timing function
*external temperature sensor, automatic temperaturecompensation
*output power regulatory function, saving energy and protectingenvironment.

*compactstructure, small volume, easy to install

    

PRODUCTFUNCTION

*Overprotection: could chose LVD mode or SOC mode

*Overvoltageprotection: 12V system 15.5V, 24V system 31V cut off theload

*Low-voltageprotection: 12V system 10.5V, 24V system 21V cut off theload

*Over-currentprotection: When the actual current is 110% greater than the ratedcurrent, Delay of 120 s to cut off the load

  When the actual current is 150% greater than the rated current,Delay of 10 s to cut off the load

  When the actual current is 200% greater than the rated current,Delay of 3 s to cut off the load

*Short-circuitprotection: When the actual current is three times greater than therated current, immediately cut off the load

*Reversepolarity protection

 

4.Solar panel Description

1. We couldensure the conversion efficiency of solar panel with highefficiency polycrystalline cells and high transmittance temperingglass, this not only reduce solar power supply system installationcost , but also increase unit system area electric-power output.

2. Solar powerfloat ±3% , it could ensure our customer get the power from solarpanel, reduce the power loss caused from mismatching power, improvesystem output function and bring more benefit for customer.

3. Obtained TUVand so on, we keep authentication high consistent with standardtesting in actual production.

4. 5 years’warranty, no less than 90% of standard output power is within 10years, 80% of standard output power is within 25 years.

 

productconstitution

Solar panels aremade of monocrystalline or polycrystalline silicon solar cells,series connection or parallelconnection, then hot-pressed and sealed by tempering glassand EVA, TPT, equipped with aluminum alloy frame, have thecharacteristic of the wind-resistant, hail resistant and easyinstallation. The panel is widely used in solar lighting, lamps,household power supply, road transport, building and photovoltaicpower station, etc.

 

1. Temperingglass

2.EVA 

3. solercell

4. backveneer

5. junctionbox

6. aluminumalloy frame

 

 

5.Pole and other fitting

Components surface is sprayed with the powder after hot galvanizedanti-corrosion treatment, white color (or other colors on custom’srequest), smooth surface, non-discolouring, no pinhole hang, no flow, no peelingphenomenon ; Galvanized layer thickness is not less than 85microns, the coating thickness is not less than 100 microns.Galvanized treatment is in accordance with the standard ofGB/T13912-2002 " Film pencil hardness measurement”, GB/T1732-1993“Paint film punching resistance measurement”, GB/T9286-1998 “Paintfilm of the cross test”   

 

6.CERTIFICATE--- TUV, IEC, CE, MCS, SONCAP, ISO, BV,SGS 

 

7. LoadingPicuture

 

 

8. Part of solar streetlight project Picuture:

 

 

 9. WORKINGSHOPPICTURE