Description:
Induction Street Light1.Long life
2. High efficacy
3.CE FCC RoHS CCC LVD
4.Warranty for 5 years
Cheap! High quality 5 years warranty good heat dissipationlong life span ip65 150w -300w Induction StreetLight
1.Inductionstreetlight fixtures ----productstechnical parameters
| Name | Specification of induction streetlight fixtures |
| Model | DL-LD05E |
| Standard power setting | Low Frequency Induction Lamp 200W |
| Light source option | Low Frequency Induction Lamp 150W-300W |
| Applicable height of lamp-post | 5-12M |
| Installation diameter | 60mm |
| High luminous flux duration rate | 95% Luminous flux remain after 2, 000 hours operating |
| Voltage option | European standard & American standard |
| Lamp Luminous Efficiency(lm/w) | ≥80 |
| CRI (Ra>) | 70-80Ra |
| Color Temperature(CCT): | 2700K-6500K |
| Input Voltage(V) | 110v~277v |
| Rated frequency | 50Hz |
| Power factor | ≥0.98 |
| Working Temperature(°C) | -20ºC - 50ºC |
| Life span | 100, 000H |
| IP Rating | Ip65 |
| Weight(200w) | Net weight 9.8KG Gross weight 12.0KG |
| Product dimensions(mm) | L860*W410*H152/ L1000*W400*H245 |
| Package dimensions(mm) | L930*W460*H270/ L1060*W460*H280 |
| Lamp shade for induction street light | |
| Material | High pure aluminum |
| Glass (optional) | 5mm Explosion-proof glass |
2. Technical data of lampsource of induction street light
3. Product featuresof induction streetlight
(1) Die-cast aluminum electrical box: electrostatic spray coating,corrosion resisting.
(2) The upper and lower parts of the lamp body are made of highquality high-pressure die-casting aluminum,
providing the highest class protection.
(3) imported high-purity alumina made unibody reflector, providingthe highest light efficiency..
(4) High-intensity, thermo stability curved 5mm toughened glass,glued down with the reflector by silica gel.
Dust proof & water proof.
(5) Electrostatic spray coating finish, using international RALstandard color, giving elegant appearance.
(6) The electric parts and the light source part are mountedseparately, making a better heat dissipation.
(7)100 hours of professional aging test, stable performance.Greatly reduces maintenance cost.
(8) No flash, instant on, offering a better vision comfortlevel.
(9) Liquid mercury free: Not harmful to mankind andenvironment.
(10) Low harmonic content: meet the international L classstandard.
(11) Adopt energy-saving electronic ballast to provide high powerfactor, low current, and reduce electric charge cost.
(12)Package case passed gravitational acceleration vibration test.The safety during transportation is strengthened.
4. Installation &maintenance of induction street light
(1) Firsty, lamp-post should be prepared. All the parts andaccessories of the lamp should be prepared beforehandtoo.
(2)Turn off the power before installation.
(3)Open the back shell of the light, connect the light’s power lineand the wires from the lamp post-pipe. AC power 3-core wires shouldfollow the instruction below: red line to the “L “ of the power,blue or black should be connected to the N of the power, yellow orgreen connected to the ⊥, DC power’s red line is for the positiveof the power, black to the negative,
Attention: don’t connect positive to the wrong line.
(5) Loosen up the hexagon bolt on the cover plate of the lamp, putthe lamp into the hole of the post pipe until it hits the stop.Adjust the angle of the lamp and the ground. ( using the enclosedwrench fasten the 4 hexagon bolts until it’s tightlyfastened.)
(6) Mount the back shell back, fasten the bolts, done.
Remarks: 3*2.5m wires have enclosed when leaving the factory, 800mmin length. If there’re special requirements, pleasespecify.
5.Packing details ofinduction streetlight
1. Neutral Package
2. Package in carton with good inner supporting package withpolyethylene bubble ;1pcs/ctn independent packing
3. Wooden packing if necessary
6.Application range of induction streetlight
Application in outdoor environment such asarterial traffic, secondary main streets, blocks, parks, villaareas, express ways, etc.
7. DLLAMPinduction street light lampsource Advantages
1. Better light distribution in transverse space, light uniformityand soft.
2 Use high quality special designed magnetic core material forinduction lamp, low heat consumption, lower energy loss, stableperformance, with better applicability anduniformity.
3. Mercury: Special dispensing of mercury, high purity, notvolatile.
4. Phosphor: High-purity, rare earth fluorescent phosphor withluminousefficiency.
5. Gas: Purityrare
8.DLLAMP induction street light ballastAdvantages
Long life and high efficiency Ballast:
1.American IC;
2.Japanese MOS tube;
3.Lightning protection device.
4.Special anti-surge protection circuit
5.Thick PCB, big panel, scientific circuit design
6.6 patents
7.5 years warranty.
9.DLLAMP induction street lightLamp shadeadvantages
1. Material : Shell is made of shock resistant high pressuredie-casting aluminum.
Light panel is made of heat resistant toughened glass (optional).Luminous efficacy is above 90%.
2.The heat dissipation structure ensures theluminous flux high output and reduces the attenuation of reflectioncoefficient.
3. Reflector : High pure aluminum anodic oxidization reflector withspecial designed is better for light distribution effect, whichsupport excellent optical performance.
10. Certification of induction street lightfixtures
11. Our service of induction streetlight
1. Professional technical and commercial service provided byexperienced staff.
2. Custom-made design is available, OEM&ODM arewelcomed.
3. Our professional will calculate and provide excellent projectfor the use of light after you give us the using places, square,height, etc.
4. Providing 5 years warranty for low frequency lamps and 3 yearsfor high frequency lamps and continuous after salesservice.
5. Quick delivery.
