Description:
Waterproof Outdoor Dustproof Light1.Long life(>60000)
2.High efficacy (85)
3.CE RoHS FCC CCC
Waterproof OutdoorDustproof Light
1.Specificaton of dustprooflight
Model | DL-LD10E |
Standard powersetting | Low FrequencyInduction Lamp 300W |
Light sourceoption | Low FrequencyInduction Lamp |
Applicableheight of lamp-post | 5-12M |
Installationdiameter | 60mm |
Luminousflux | 24500LM(300W) |
High luminousflux duration rate | 95% Luminousflux remain after 2, 000 hours operating |
Voltageoption | Europeanstandard & American standard |
Lamp LuminousEfficiency(lm/w) | ≥75 |
CRI(Ra>) | 70-80Ra |
ColorTemperature(CCT): | 2700K-6500K |
InputVoltage(V) | 110v~277v |
Ratedfrequency | 50Hz |
Powerfactor | ≥0.98 |
WorkingTemperature(°C) | -20ºC -50ºC |
Lifespan | 60000H |
IPRating | Ip65 |
Weight | Net weight18.3KG Gross weight 19.4KG |
Productdimensions | 1500mm*400mm*150mm |
Packagedimensions | 1550mm*460mm*260mm |
Lampshape | |
Material | High purealuminum |
Glass(optional) | Explosion-proofglass |
Size | 1500mm*400mm*150mm |
2.Technical data of dustprooflight
3.Product features of dustprooflight
(1) Die-castaluminum electrical box: electrostatic spray coating, corrosionresisting.
(2) The upperand lower parts of the lamp body are made of high qualityhigh-pressure die-casting aluminum, providing the highest classprotection.
(3) importedhigh-purity alumina made unibody reflector, providing the highestlight efficiency..
(4)High-intensity, thermo stability curved 5mm toughened glass, glueddown with the reflector by silica gel. Dust proof & waterproof.
(5)Electrostatic spray coating finish, using international RALstandard color, giving elegant appearance.
(6) Theelectric parts and the light source part are mounted separately,making a better heat dissipation.
(7)100 hoursof professional aging test, stable performance. Greatly reducesmaintenance cost.
(8) No flash,instant on, offering a better vision comfort level.
(9) Liquidmercury free: Not harmful to mankind and environment.
(10) Lowharmonic content: meet the international L classstandard.
(11) Adoptenergy-saving electronic ballast to provide high power factor, lowcurrent, and reduce electric charge cost.
(12)Packagecase passed gravitational acceleration vibration test. The safetyduring transportation is strengthened.
4.Induction lamp source compare with otherlamp
| Comparison project | Electrodeless lamp | metal halide lamp | high - pressure sodiumlamp | High pressure mercurylamp |
| Lifetime | 60, 000 hrs | 6, 000-15, 000hrs | 15, 000 hrs | 3, 000-6, 000 hrs |
| Power saving performance | Excellent | good | good | poor |
| Lumen efficacy | 70-85 lm/W | 70-90 lm/W | >90 lm/W | 43 lm/W |
| light -declining(%) | small, 5%(5000h) | big, 30%(5000h) | big, 20%(5000h) | very big, 45%(5000h) |
| CRI | >80, Excellent | 65-90, good | 23, Very poor | 45, poor |
| Instant-on and hotrestrike | Instant restart | no | no | no |
| Flicker | no | yes | yes | yes |
| glare | no | yes | yes | yes |
| Environmentalprotection | No waste lamp recycling,no mercurypollution | waste lamprecycling | waste lamprecycling | waste lamp recycling,mercury pollution |
5.Installation & maintenance of dustproof light
(1) First ofall, lamp-post should be prepared. All the parts and accessories ofthe lamp should be prepared beforehand too.
(2)Turn offthe power before installation.
(3)Open theback shell of the light, connect the light’s power line and thewires from the lamp post-pipe. AC power 3-core wires should followthe instruction below: red line to the “L “ of the power, blue orblack should be connected to the N of the power, yellow or greenconnected to the ⊥, DC power’s red line is forthe positive of the power, black to the negative,
Attention:don’t connect positive to the wrong line.
(5) Loosen upthe hexagon bolt on the cover plate of the lamp, put the lamp intothe hole of the post pipe until it hits the stop. Adjust the angleof the lamp and the ground. ( using the enclosed wrench fasten the4 hexagon bolts until it’s tightly fastened.)
(6) Mount theback shell back, fasten the bolts, done.
Remarks:3*2.5m wires have enclosed when leaving the factory, 800mm inlength. If there’re special requirements, pleasespecify.
6.Packing details of dustprooflight
(1). NeutralPackage
(2). packagein carton with good inner supporting package with bubble paper;1pcs/ctn independent packing
(3). woodenpacking if necessary
7.Application range of dustprooflight
Application inoutdoor environment such as arterial traffic, secondary mainstreets, blocks, parks, villa areas, express ways, etc..
8.DLLAMP dustprooflight lamp source Advantages
1. Better lightdistribution in transverse space, light uniformity andsoft.
2 Use highquality special designed magnetic core material for induction lamp,low heat consumption, lower energy loss, stable performance, withbetter applicability and uniformity.
3. Mercury:Special dispensing of mercury, high purity, notvolatile.
4. Phosphor:High-purity, rare earth fluorescent phosphor with luminousefficiency.
5. Gas: Purityrare
9.DLLAMP dustprooflight ballastAdvantages
Long life andhigh efficiency Ballast:
1. AmericanIC;
2. JapaneseMOS tube;
3. Lightningprotection device.
4. Specialanti-surge protection circuit
5. Thick PCB,big panel, scientific circuit design
6. 6patents
7. 5 yearswarranty.
10.DLLAMP dustprooflight Lampshade advantages
1.Material :Shell is made of shock resistant high pressure die-castingaluminum.
Light panel ismade of heat resistant toughened glass (optional). Luminousefficacy is above 90%.
2.The heatdissipation structure ensures the luminous flux high output andreduces the attenuation of reflection coefficient.
3.Thickness:1-1.2 mm, strong and tough
4.Reflector :High pure aluminum anodic oxidization reflector with specialdesigned is better for light distribution effect, which supportexcellent optical performance.
11.Certificationofdustprooflight
12.Ourservice of dustproof light
1. Replying your inquirywithin 10 working hours.
2. Professional technical andcommercial service provided by experienced staff.
3. Custom-made design isavailable, OEM&ODM are welcomed.
4. Our professional willcalculate and provide excellent project for the use of light afteryou give us the using places, square, height, etc.
5. Providing 5 years warrantyfor low frequency lamps and 3 years for high frequency lamps andcontinuous after sales service.
6. Quick delivery.
