Description:
Roads 250w aluminium street light die casting1.Long life(>60000)
2.High efficacy (85)
3.CE RoHS CCC LVD
1. Roads 250waluminium street light die casting
2.Secification of Roads 250w aluminium street light diecasting
Name | Specification oflvd induction lighting |
Model | DL-LD11E |
Standard powersetting | Low FrequencyInduction Lamp 250W |
Light sourceoption | Low FrequencyInduction Lamp 80W-300W |
Applicableheight of lamp-post | 5-12M |
Installationdiameter | 60mm |
Luminousflux | 20500LM(250W) |
High luminousflux duration rate | 95% Luminousflux remain after 2, 000 hours operating |
Voltageoption | Europeanstandard & American standard |
Lamp LuminousEfficiency(lm/w) | ≥75 |
CRI(Ra>) | 70-80Ra |
ColorTemperature(CCT): | 2700K-6500K |
InputVoltage(V) | 110v~277v |
Ratedfrequency | 50Hz |
Powerfactor | ≥0.98 |
WorkingTemperature(°C) | -20ºC -50ºC |
Lifespan | 60000H |
IPRating | Ip65 |
Weight | Net weight 10.4KG Gross weight12.5KG |
Productdimensions | L756mm×W580mm×H247mm |
Packagedimensions | L640mm×W360mm×H610mm |
Lampshape | |
Material | High purealuminum |
Glass(optional) | 5mmExplosion-proof glass |
Size | L756mm×W580mm×H247mm |
2. Technical data of Roads250w aluminium street light die casting
3. Productfeatures of Roads 250w aluminium street light diecasting
(1) Die-castaluminum electrical box: electrostaticspray coating, corrosionresisting.
(2) The upperand lower parts of the lamp body are made of high qualityhigh-pressure die-casting aluminum, providing the highest classprotection.
(3) importedhigh-purity alumina made unibody reflector, providing the highestlight efficiency..
(4)High-intensity, thermo stability curved 5mm toughened glass, glueddown with the reflector by silica gel. Dust proof & waterproof.
(5)Electrostatic spray coating finish, using international RALstandard color, giving elegant appearance.
(6) The electricparts and the light source part are mountedseparately, making a betterheat dissipation.
(7)100 hours ofprofessional aging test, stable performance. Greatly reducesmaintenance cost.
(8) No flash,instant on, offering a better vision comfort level.
(9) Liquidmercury free: Not harmful to mankind and environment.
(10) Lowharmonic content: meet the international L classstandard.
(11) Adoptenergy-saving electronic ballast to provide high power factor, lowcurrent, and reduce electric charge cost.
(12)Package casepassed gravitational acceleration vibration test. The safety duringtransportation is strengthened.
4. Installation& maintenance
(1) First ofall, lamp-post should be prepared. All the parts and accessories ofthe lamp should be prepared beforehand too.
(2)Turn off thepower before installation.
(3)Open the back shell of thelight, connect the light’s power line and the wires from the lamppost-pipe. AC power 3-core wires should follow the instructionbelow: red line to the “L “ of the power, blue or black should beconnected to the N of the power, yellow or green connected tothe ⊥, DC power’s red line is for thepositive of the power, black to the negative,
Attention: don’tconnect positive to the wrong line.
(5) Loosen upthe hexagon bolt on the cover plate of the lamp, put the lamp intothe hole of the post pipe until it hits the stop. Adjust the angleof the lamp and the ground. ( using the enclosed wrench fasten the4 hexagon bolts until it’s tightly fastened.)
(6) Mount theback shell back, fasten the bolts, done.
Remarks: 3*2.5mwires have enclosed when leaving the factory, 800mm in length. Ifthere’re special requirements, please specify.
5.Packing details of Roads 250w aluminiumstreet light die casting
1. NeutralPackage
2. package in carton with goodinner supporting package with bubble paper ;1pcs/ctn independentpacking
3. woodenpacking if necessary
6. Applicationrange
Applicationin outdoor environment such as arterial traffic, secondary mainstreets, blocks, parks, villa areas, express ways, etc..
7.Doulight lvd induction lighting lamp sourceAdvantages
1.Better light distribution in transverse space, light uniformity andsoft.
2Use high quality special designed magnetic core material forinduction lamp, low heat consumption, lower energy loss, stableperformance, with better applicability anduniformity.
3.Mercury: Special dispensing of mercury, high purity, notvolatile.
4.Phosphor: High-purity, rare earth fluorescent phosphor withluminousefficiency.
5.Gas: Purity rare
7.Doulight Induction lvd indctionlighting ballastAdvantages
Long life andhigh efficiency Ballast:
1. AmericanIC;
2. Japanese MOStube;
3. Lightningprotection device.
4. Specialanti-surge protection circuit
5. Thick PCB,big panel, scientific circuit design
6. 6patents
7. 5 yearswarranty.
8.Doulight Induction lvd induction lighting Lamp shadeadvantages
1.Material: Shell is made of shock resistant high pressure die-castingaluminum.
Lightpanel is made of heat resistant toughened glass (optional).Luminous efficacy is above 90%.
2.Theheat dissipation structure ensures the luminous flux high outputand reduces the attenuation of reflection coefficient.
3.Thickness:1-1.2 mm, strong and tough
4.Reflector: High pure aluminum anodic oxidization reflector with specialdesigned is better for light distribution effect, which supportexcellent optical performance.
9.Certification of Roads 250w aluminiumstreet light die casting
10.Our service of Roads 250w aluminium streetlight die casting
1. Replying yourinquiry within 10 working hours.
2. Professionaltechnical and commercial service provided by experiencedstaff.
3. Custom-madedesign is available, OEM&ODM are welcomed.
4. Ourprofessional will calculate and provide excellent project for theuse of light after you give us the using places, square, height,etc.
5. Providing 5years warranty for low frequency lamps and 3 years for highfrequency lamps and continuous after sales service.
6. Quickdelivery.
outdoor lights |street lamp outdoor lights | induction street lampoutdoor lights
