Description:
City Street Lighting1.Long life
2. High efficacy
3.CE FCC RoSH CCC LVD
4.Warranty for 5 years
CE FCC RoSH IP65Induction City Street Lighting
1.Citystreetlighting ----products technicalparameters
| Name | Specification of city streetlighting |
| Model | DL-LD01E |
| Standard powersetting | Low Frequency Induction Lamp200W |
| Light source option | Low Frequency Induction Lamp120W-200W |
| Applicable height oflamp-post | 5-12M |
| Installationdiameter | 60mm |
| Luminous flux (120W) | 9600 LM |
| Luminous flux (150W) | 12000 LM |
| Luminous flux (200W) | 16500LM |
| High luminous flux durationrate | 95% Luminous flux remain after2, 000 hours operating |
| Voltage option | European standard & Americanstandard |
| Lamp LuminousEfficiency(lm/w) | ≥80 |
| CRI (Ra>) | 70-80Ra |
| ColorTemperature(CCT): | 2700K-6500K |
| Input Voltage(V) | 110v~277v |
| Rated frequency | 50Hz |
| Power factor | ≥0.98 |
| WorkingTemperature(°C) | -20ºC - 50ºC |
| Life span | 100, 000H |
| IP Rating | Ip65 |
| Weight | Net weight 10.5KG Gross weight 12.5KG |
| Product dimensions | L910mm×W380mm×H140mm |
| Package dimensions | L960mm×W410mm×H260mm |
| Lamp shape | |
| Material | High pure aluminum |
| Glass (optional) | 5mm Explosion-proofglass |
| Size | 895m x 380mm x 200mm |
2. Technical data of lamp source of city streetlighting
3. Product features of city streetlighting
(1)Die-cast aluminum electrical box: electrostatic spray coating,corrosion resisting.
(2)The upper and lower parts of the lamp body are made of high qualityhigh-pressure die-casting aluminum,
providingthe highest class protection.
(3)imported high-purity alumina made unibody reflector, providing thehighest light efficiency..
(4)High-intensity, thermo stability curved 5mm toughened glass, glueddown with the reflector by silica gel.
Dustproof & water proof.
(5)Electrostatic spray coating finish, using international RALstandard color, giving elegant appearance.
(6)The electric parts and the light source part are mountedseparately, making a better heat dissipation.
(7)100hours of professional aging test, stable performance. Greatlyreduces maintenance cost.
(8)No flash, instant on, offering a better vision comfortlevel.
(9)Liquid mercury free: Not harmful to mankind andenvironment.
(10)Low harmonic content: meet the international L classstandard.
(11)Adopt energy-saving electronic ballast to provide high powerfactor, low current, and reduce electric charge cost.
(12)Packagecase passed gravitational acceleration vibration test. The safetyduring transportation is strengthened.
4. Installation & maintenance of citystreetlighting
(1) Firsty, lamp-postshould be prepared. All the parts and accessories of the lampshould be prepared beforehand too.
(2)Turnoff the power before installation.
(3)Openthe back shell of the light, connect the light’s power line and thewires from the lamp post-pipe. AC power 3-core wires should followthe instruction below: red line to the “L “ of the power, blue orblack should be connected to the N of the power, yellow or greenconnected to the ⊥, DC power’s red line is for the positive of thepower, black to the negative,
Attention:don’t connect positive to the wrong line.
(5)Loosen up the hexagon bolt on the cover plate of the lamp, put thelamp into the hole of the post pipe until it hits the stop. Adjustthe angle of the lamp and the ground. ( using the enclosed wrenchfasten the 4 hexagon bolts until it’s tightlyfastened.)
(6)Mount the back shell back, fasten the bolts, done.
Remarks:3*2.5m wires have enclosed when leaving the factory, 800mm inlength. If there’re special requirements, pleasespecify.
5. Packingdetails of city streetlighting
1.Neutral Package
2.Package in carton with good inner supporting package withpolyethylene bubble ;1pcs/ctn independent packing
3.Wooden packing if necessary
6. Application range of city streetlighting
Applicationin outdoor environment such as arterial traffic, secondary mainstreets, blocks, parks, villa areas, express ways,etc.
7.DLLAMP citystreetlighting lampsource Advantages
1. Better light distribution in transverse space, light uniformityand soft.
2 Use high quality special designed magnetic core material forinduction lamp, low heat consumption, lower energy loss, stableperformance, with better applicability anduniformity.
3. Mercury: Special dispensing of mercury, high purity, notvolatile.
4. Phosphor: High-purity, rare earth fluorescent phosphor withluminousefficiency.
5. Gas: Purityrare
8.DLLAMP citystreetlighting ballastAdvantages
Longlife and high efficiency Ballast:
1. American IC;
2. Japanese MOS tube;
3. Lightning protectiondevice.
4. Special anti-surge protectioncircuit
5. Thick PCB, big panel, scientific circuitdesign
6. 6 patents
7. 5 years warranty.
9.DLLAMP city streetlightingLamp shadeadvantages
1. Material : Shell is made of shock resistant high pressuredie-casting aluminum.
Light panel is made of heat resistant toughened glass (optional).Luminous efficacy is above 90%.
2.The heat dissipation structure ensures the luminous flux highoutput and reduces the attenuation of reflectioncoefficient.
3. Reflector : High pure aluminum anodic oxidization reflector withspecial designed is better for light distribution effect, whichsupport excellent optical performance.
10. Certificationof citystreetlighting
11. Our service ofcity streetlighting
1.Professional technical and commercial service provided byexperienced staff.
2.Custom-made design is available, OEM&ODM arewelcomed.
3.Our professional will calculate and provide excellent project forthe use of light after you give us the using places, square,height, etc.
4.Providing 5 years warranty for low frequency lamps and 3 years forhigh frequency lamps and continuous after sales service.
5.Quick delivery.
