Price:Negotiable

Send Inquiry

Description:

solar LED street light
1. Height:3-12m
2. pole Material:Q235 steel
3. light source: LED, Saving energy, HEFD
4.grade A cells

LED solar energy streetlight

 

SPECIFICATION:

 

JYdL-108080
Name	Specification	Quantity	Parameter
Solarpanel	140W/12V	2 piece	Polycrystalline, 156x156mm, 36piece. Size:1490x670x35with 90cm wires, MC4 Connector. and  Weight:12KG Warranty:More than 90% output power in 10 years .and more than 80% outputpower in 25 years. Theproduct have passed TUV, IEC,MCS etc certificate.
Lightsource	LED80W/24V	1 piece	Double Integrated Power LED(80W), WokingVoltage DC24V, General luminous:8000lm,LED LuminousEfficiency:100lm/W, Centerilluminance:20lx, Ra>80, Color temperature:2700-7000, ProtectionGrade :IP65, Working life >50000, It can woke more than 10 yearsin accordance with 12 hours a day. Lampshade is Die-casting molded with aluminum alloy, and its face isUV-resistant and corrosion resistant . Nobad glare; No Strobe; Start without delay .Low maintenance cost.
Controller	20A	1piece	PHOCOSCIS Series, 12V/24VAutomatic identification , light control andtime control, ProtectionGrade IP68
Battery	12V/150AH	2piece	Gel Battery that dedicated to solar energy. It can use recurrentmore than 400 times in 100% discharge cases For the solar energystreet lamp that in simple circulatory system. And  its advantage is that :the smallself -discharge rate , the better deep discharge, Top chargeacceptance, large capacity, strong start in low , the good shockresistant and Anti-temperature chargeProduction The two Battery is used in series in this collocation
Poleand other steel fitting	10M	Set	Best steel Q235 or Q345;hot dip galvanized and paint coated . iron plate is rolled into type for one time . Flange plate :400x400x20mm Solar panel bracket  and  4# or 5# Angle iron, 50x5mm and100x100mm Flat iron. Square tube is assembled by bolt , any sectionis made with mold. With highefficiency and precision , standardized parts canreplace each other and the same time increase the packing quantityand reduce transport cost . Battery body are welded after 2mm plate stamping molding Lamp arm 60x3mm Welded tube and iron plate welding
Wiresharness	--	1piece	Withthe special connector , standardization, substitutability , highinstalling efficiency, saving cost . Wireharness can be designed according to different lamp type.
others	baseplate 20 steel rod, standard component and so on
Conditions	Voltageof system: 24V, working time: 10 hours , Best work temperature-20degree-50degree
PackingQuantity	70set/40HQ

 

Description ofdesign

1. Thissystem configuration is suitable for area that peak sunshine forfive hours, three continuous rainy days. System configuration canbe designed according to customer''s specific project requirementsand climate conditions.

2. Theenergy of Solar street lighting is form solar radiation, Whetherthe sunlight that exposure to solar panels is abundant or notdirectly affect lamp lighting effects, so solar panels can exposureto sunlight at any period of time , so when Select where to installthe lamp, you should avoid tall buildings or other objects that canblock the panels.

3. Inorder to ensure its beautiful characteristic and its ability thatreceive better solar radiation, we suggest that you should cleanthe dust on the solar panels every half of one year , but don''trinse area from the bottom up.

4.Battery is placed on the top of the pole, and it’s good for batteryheat-dissipation, shortening the length of the cable, reducingpressure drop, easy installation & anti-theft.

Applicationrange

The road, City Road, PedestrianLane, Squares, Schools, Parks, Gardens, Residential areas, lant andother places of outdoor lighting.

 1.LED Description

 

LEDlamp shade is a transparent shade and made of polycarbonate plasticinjection molding material, high strength, good light ; using LEDas the light source, and LED is light emitting diodes, has thecharacteristics of high efficiency and long life.At present, thelamp is shaping up as a mainstream lighting products of newgeneration.

 

 

Useintellectual property rights to encapsulate the single integratedhigh power (80 w) LED light source, applying the unique lightsource design of multiple single chip integrated single-mode , andchoose imported high brightness chip; 

 

1. Havea initiate integration design for radiator and lamp body , LED isdirect connected to shell tightly , heat is dissipated byconvection from the outside faces of the radiator to thesurrounding air.guaranteed the LED street light the lifespan of50000 hours fully . If working 12 hours a day, its lifespan is morethan 10 years, of course have a low maintenance cost.

 

2. Lampshade is die-casted to model with aluminum alloy , and it can playa role in heat dissipation waterproof, dustproof. Have a treatmentthat UV-resistant and corrosion resistance for lighting surface andthe overall lighting up to the IP65 standard. 

 

3.A monomer ellipse aluminumreflective cavity with solitary ball surface design, LEDlight is controlled in the range of needs, improves the uniformityof lamps glowing effect and light energy utilization, but alsohighlight the advantages of energy - saving LED lamps.Compared totraditional sodium lamp, you can save more than 70 %;

 

4.Non-badness glare, non-stroboscopic . Eliminate the dazzling ,visual fatigue and interference of sight linethat caused by the badness glare of the common street light.Improve the safety of driving;

 

5. Lowworking voltage, advantage: Not like ordinary street lamp thatbecause of the high-pressure adsorption dust, result in the chimneybecoming black. safe and reliable;

 

6. Lowoperating temperature, LED light source belong to cold lightsource, good heat dissipation, the operating temperature<60degree, Don''t cause aging yellow lampshade;

 

7.Start without delay, Electricity is to reach normal brightness,Pass on electricity immediately reach normal brightness, no needwaiting, Eliminates the traditional street lamp for a long periodof time the boot process;

 

8.Impact resistance, be able to bear shock, No filament and glassshell, No traditional lighting splintery problem;

 

9. Highcolor rendering index, good color rendering. The color is morereal, more colorful;

 

10.Variety of color temperature for chose, Can meet the requirementsof different occasions for color temperature;

 

11.Wide input voltage, Constant current technique, high efficiency,low quantity of heat, High precision of constantcurrent;

 

12. Forelectricity grid is pollution-free. Power factor≥0.9. harmonicdistortion≤20%;

 

13.Intelligent control, constant current, the power could beintelligence adjusted according to the needed. Using single chipmicrocomputer combined with the traditional power supply converter,can realize intelligent control of high power LED light source:light-operated time control power automatic adjustment;

 

14. Thethin of the appearance, can effectively reduce wind resistance,reducing load of the light pole, enhanced safetycoefficient;

 

15.Environment-friendly; no lead, no mercury etc pollution element,there is no pollution to the environment.

 

 

 

2.Battery Description

Gelbattery is able to bear overfull charge or overfull discharge, ableto bear shaking, shock resistance, Long storage life. High qualityalloy plate grid and unique electrolyte formula, Delicate andperfect processing and manufacturing technology, Make the batteryhas a large capacity, good deep discharge performance, chargeacceptance ability, low temperature starting ability, lowself-discharge rate, Good performance of resistance to temperaturechange, , long life characteristics and so on. Security sealstructure, no need add acid or water to maintenance it, Does notleak acid, No acid mist, Environmental pollution free.

Storagebattery is gel deep cycle discharge type, apply to frequent loadchanges, harsh environment temperature conditions. inside aspecially designed grid to ensure the reliability of the depth ofdischarge cycle, under this 100% discharge circumstance, couldrecycle use it 400 times. Used for solar street lamps and otherlight cycle system, could guarantee the cycle life of more than2000 times.

   

  

3.Controller Description

CIScontroller is special designed for solar street light, provideperfect, multiple protection for solar street lamps’ electricalsystems, and through good control strategy, effective extend thesystem’s power supply time.
*protection grade:IP68, effective dust-proof and water-proof
*sturdyand durable aluminium alloy case, anti-corrosion
*fourstages charge control(main charge, powerful charge, equalizingcharge, float charge)
*Singleand double street light output contro l flexible
*infraredremote controller (CU) set, simplicity and convenienceoperator 
*LEDstatus indicate
*at nightall the time, morning and twilight double time light-operated/timecontrol timing function
*externaltemperature sensor, automatic temperature compensation
*outputpower regulatory function, saving energy and protectingenvironment.

*compact structure,small volume, easy to install

 

4.Solar panel Description

1. Wecould ensure the conversion efficiency of solar panel with highefficiency polycrystalline cells and high transmittance temperingglass, this not only reduce solar power supply system installationcost , but also increase unit system area electric-power output.

2.Solar power float ±3% , it could ensure our customer get the powerfrom solar panel, reduce the power loss caused from mismatchingpower, improve system output function and bring more benefit forcustomer .

3.Obtained TUV and so on, we keep authentication high consistent withstandard testing in actual production.4. 5 years’ warranty,no less than 90% of standard output power is within 10 years, 80%of standard output power is within 25 years.

 

 

 

 

5. Model of solar streetlight

 

 

  

 6.CERTIFICATE

 

  

 

7. Loading Picuture

 

 

8. Part of solar street lightproject Picuture