Send Inquiry
Description:
Best quality excavator machineConvenient control
Low noise
Reasonable price
SGS
Best quality excavatormachine
Introduce
| Model | XE15 | ||
| Operatingweight | kg | 1640 | |
| Standard bucketcapacity | m³ | 0.044 | |
| Engine | EngineModel | / | 3TNV82A |
| Direct injection | / | √ | |
| Four strokes | / | √ | |
| Water cooling | / | √ | |
| Turbo charged | / | × | |
| Air to airintercooler | / | × | |
| No. of cylinders | / | 3 | |
| Rated power/speed | kw/rpm | 16.5/2200 | |
| Max. torque/speed | N.m | 86.5/1320 | |
| Displacement | L | 1.33 | |
| performance | Travel speed | km/h | 4.4/2.4 |
| Swing speed | r/min | 11 | |
| Max. gradeability | / | 30° | |
| Ground pressure | kPa | 23.8 | |
| Max.Bucket diggingforce | kN | 13.9 | |
| Max.arm crowdforce | kN | 8.8 | |
| hydraulicsystem | Main pump | / | NACHI (Japan) |
| Rate flow of mainpump | L/min | 2×19.8 14.1 | |
| Max pressure of prime reliefvalve | MPa | 24 | |
| Max pressure of travelsystem | MPa | 21 | |
| Max pressure of swingsystem | MPa | 18 | |
| Max pressure of pilotsystem | MPa | 3.3 | |
| Oilcapacity | Fuel tank capacity | L | 20 |
| Hydraulic tankcapacity | L | 29 | |
| Engine lubrication | L | 5.5 | |
| Overalldimension | A Overall length | mm | 3760 |
| B Overall width | mm | 1080 | |
| C Overall height | mm | 2400 | |
| D Overall width ofupperstructure | mm | 1080 | |
| E Track length | mm | 1578 | |
| F Overall width ofundercarriage | mm | 1080 | |
| G crawer width | mm | 230 | |
| H Dozerblack(width/height) | mm | 1080×225 | |
| I Tumbler distance | mm | 1217 | |
| J Crawer gauge | mm | 850 | |
| K Clearance under counterweight | mm | 472 | |
| L Ground clearance | mm | 180 | |
| M Min.tail swingradius | mm | 1190 | |
| operatingrange | A Max. diggingheight | mm | 3615 |
| B Max. dumpingheight | mm | 2480 | |
| C Max. diggingdepth | mm | 2320 | |
| E Max. vertical wall diggingdepth | mm | 1520 | |
| F Max. diggingreach | mm | 3915 | |
| G Min. swing radius | mm | 1675 | |
| H Max.dozer liftingheight | mm | 220 | |
| I Max.dozer cuttingdepth | mm | 240 | |
| Angle of armdeflection | Degree | 70/50 | |
Look, Theyare working
Rich stock and they areinspected
It''stopographies
Business partners arevisiting them
After looking at theabove details , I believe that you are interested in ourproducts, you can go into http://www.cmec-hb.com. You will findmore surprises
