Description:
HoistOptional Features :
1)Variable speed control
2) Radio remote control
3) Suitable for curvature type
ELECTRIC WIRE ROPEHOIST
There are two type of hoist
MonORAIL TYPE UP TO 15 TON CAP.
Fix Suspension type
Hoist with Hand Push trolley type
Hoist with motor driven trolley type
Trolley can be adjusted for various flange width
DOUBLE RAIL TROLLEY TYPE (CRAB) UP TO 100 TONCAP
Compact Design & high Safety Level
Wide selection of operation speed
Easily Accessible cut down repair time
VIKRANT hoist are manufactured in compliance toIS 3938 to meet Class II, III, & IV duty applications.
Hoisting machinery consists of Motor, Brake, Gear box, RopeDrum, Wire rope, Control Panel etc... Hoisting machinery serves thepurpose of moving loads vertically as well as transferring them onepoint of the area covered by the machinery into another.
MOTOR
Motors are totally enclosed, hoist duty with F class insulation, 150 starts/hour, 40% class duty cycle of reputed make like BharatBijli / Kirloskar/Crompton/Siemens /Rotomotive (Italy) / BCHMake
Gear Box
All gearboxes used in the cranes are totally enclosed in dustproof construction. Gears are machined from Alloy Steel andHardened. All Gearing is enclosed in a rugged steel housing and isoil / grease splash lubricated.
BRAKES:
Suitable Electro Magnetic AC Disc / Electro Magnetic AC ShoeType / Electro hydraulic Thruster type brakes are provided in allmotions. These are automatically released when the motor circuit ison & are applied when the motor
circuit is off. This features works as a positive safety deviceas the brakes automatically comes into operation when the powersupply fails.
ROPE DRUM & ROPE GUIDE:
Steel drums are precision machine cut fabricated from seamlesspipe / plate having either single or double grooved configurations.Hoists are equipped rope guides to prevent over lapping of the ropeon the drum and to extend rope life.
LIMIT SWITCHED:
Upper and lower hoisting limit switches are standardequipments.
BOTTON BLOCK:
Bottom Blocks are equipped with protective guard around the ropeopening. Shank type forged Hook is as per IS 3815 swivel on thrustbearings.
ConTROL PANEL:
The easy to service control panels consists of standard make ofheavy duty contactors, over load relay, transformers and otherassociated equipments. All Hoists are suitable for three phases 415v - 10%, 50 Hz, AC supply, other power supply types on request.
OPTIonAL FEATURES:
The following features can be supplied on request.
1) Variable Speed Control/Micro Speedarrangement through Frequency Inverters/ Variable FrequencyDrives
2) Radio Remote Control
3) Suitable for curvature type otheroptions are available on request.
ALSO AVAILABLE:
1) Higher Lift Hoist
2) Flame Proof Applications