Description:
Accurate precision, little back lash, fine appearance and strongstructure so can assure smooth rotation.Divide any angle by the direct, indirect or differentialmethods.
spiral machining capability.
All models have threaded spindle nose and 24 hole dividing platewith easy conversion to fast direct indexing on numbers 2, 3, 4, 6,8,
12, and 24.
Hardened and grond worm gear has a 40 to 1 ratio.
Positive locking mechanism uses a 360°brake shoe.
Accurate precision, little back lash, fine appearance and strongstructure so can assure smooth rotation.
Three dividing plates are included.
Number of holes | A-Plate | 15, 16, 17, 18, 19, 20 |
B-Plate | 21, 23, 27, 29, 31, 33 | |
C-Plate | 37, 39, 41, 43, 47, 49 |
Headstock Unit: mm/inches
Model No. | A | B | H | h | a | b | g | Taper of center | Diameter of spindle hole |
HS-0 | 193 | 131 | 173 | 100 | 166 | 90 | 16 | MT2 | 18 |
7.59 | 5.15 | 6.81 | 3.93 | 6.53 | 3.54 | 0.63 | 0.71 | ||
HS-1 | 242 | 168 | 220 | 128 | 206 | 113 | 16 | MT3 | 20 |
9.52 | 6.61 | 8.66 | 5.04 | 8.11 | 4.45 | 0.63 | 0.79 |
Tailstock Unit: mm/inches
Model No. | A1 | B1 | H1 | h | a1 | b1 | g1 |
HS-0 | 175 | 87 | 102 | 100 | 130 | 92 | 16 |
6.89 | 3.42 | 4.02 | 3.93 | 5.12 | 3.62 | 0.63 | |
HS-1 | 183 | 87 | 137 | 128 | 158 | 110 | 16 |
7.20 | 3.42 | 5.39 | 5.04 | 6.22 | 4.33 | 0.63 |
