Description:
PDC anchor shank dia: 27mm, 28mm, 29mm, 30mm, 32mm, 36mm, 42mmPDC anchor shank bit thread size:
M14X1.5 M14X2 M16X2 M12X1.75
PDC anchor shank bit/morse taper shanke twist drillbit/parallel shank drill bit/hex shank masonry drillbit
PDC anchor shank bitspecifications:25mm Available size: 27mm, 28mm, 29mm, 30mm,32mm, 36mm, 42mm
thread size:M14X1.5 M14X2 M16X2 M12X1.75
PDC anchor shank drill bit
efficiency PDC bit
do PDC anchor shank bit OEM
ZM PDC shank bit apply to the anchor-network
this product have economic cutter with good impact resistance.it outside performs displays remarkably, good abrasionresisnce improved drill bit life very much and rate ofpenetration
anchor shank drill bits suitable for soft , medium or mediumand hard stratum
Application: Apply to theanchor-network support hole drilling in coal mine, transportation,hydropower
PDC anchor shank bitCharacteristics:
high wear resistance and impact-resistanttoughness; the long of drilling life, drilling efficiencycan be promoted sharply in the penetration of soft and mediumsoft formation; laber intensity can be reduced very much.The coalbits mainly are used commomly in coal and mine drilling.We can alsedo different measures according to customer''s requirements andother things.
Please find all of the product specification asfollows:
type one 1
| Colliery Tools | MainStandard(mm) | |||
| D | H | L | M | |
| 27 | 44 | 17 | M14×1.5 | |
| 27 | 54 | 17 | M12×1.75 | |
| Thread | 28 | 54 | 20 | M12×1.75 |
| joint | 29 | 52 | 18 | M14×1.5 |
| 30 | 50 | 18 | M14×1.5 | |
| 32 | 52 | 22 | M14×1.5 | |
| 32 | 56 | 22 | M12×1.75 |
type two
| Colliery Tools | Main Standard(mm) | |
| D | M | |
| Thread Joint | 38 | 12 |
| 40 | 12 | |
| 42 | 12 |
Product name
| specifications | Model | Coupling Dimension |
|
DP Anchor drill bits | 27 | DP | M14*1.5 |
|
DP Anchor drill bits | 28 | DP | M16 | |
DP Anchor drill bits | 30 | DP | M12 | |
DP Anchor drill bits | 32*M14*1.5 | DP | M14*1.5 | |
DP Anchor drill bits | 32*M12 | DP | M12 | |
DP Anchor drill bits | 32*T16 | DP | T16 |
Cutter type | Diameter(mm) | Height(mm) | Nozzle | |
Normal Type | 27 | 48 | No | Diameter |
28 | 48 | |||
29 | 48 | 3 | 4 | |
Reinforced Type | 30 | 48 | ||
32 | 48 | |||
36 | 52 | |||
42 | 60 | |||
Thread(mm):14*1.5, 12*2, 16*2
Model | Applied Terrane | |
PDC 2Wing anchor shank drill bit | Half disk normal | For the terrane of f≤8 |
Whole disk normal | For the terrane of f≤10 | |
Whole disk reinforced | For the terrane of f≤15 | |
PDC 3Wing anchor shank drill bit | Half disk normal | For the terrane of f≤15 |
Half disk reinforced | For the terrane of f≤18 | |
