Description:
1:High quality for ISO turning cemented carbide inserts2:type:SNUN/SNGN
3:High quality with all kind of chemical coating
High quality forISO turning cemented carbide inserts -SNUN/SNGN
1)ProductIntroduction:
Type | Dimension(mm) | |||||
L | L.C | S | r |
| ||
SNUN | 090304 | 9.525 | 9.525 | 3.18 | 0.4 |
|
090308 | 9.525 | 9.525 | 3.18 | 0.8 |
| |
120408 | 12.7 | 12.7 | 4.76 | 0.8 |
| |
120412 | 12.7 | 12.7 | 4.76 | 1.2 |
| |
150408 | 15.875 | 15.875 | 4.76 | 0.8 |
| |
150412 | 15.875 | 15.875 | 4.76 | 1.2 |
| |
190408 | 19.05 | 19.05 | 4.76 | 0.8 |
| |
190412 | 19.05 | 19.05 | 4.76 | 1.2 |
| |
250724 | 25.4 | 25.4 | 7.94 | 2.4 |
| |
250924 | 25.4 | 25.4 | 9.525 | 2.4 |
| |
SNGN | 090308 | 9.525 | 9.525 | 3.18 | 0.8 |
|
120408 | 12.7 | 12.7 | 4.76 | 0.8 |
| |
150408 | 15.875 | 15.875 | 4.76 | 0.8 |
| |
190412 | 19.05 | 19.05 | 4.76 | 1.2 |
| |
Grade:
XHC151:Substrate with excellent wear-resistance, incombination with MT-Ti(CN), thick layer AL2O3, TiN coating.It is an ideal grade for the finishingsteel, cast steel and stainless steel under gigh speed and drymachining.
XHC251:Cutting edge with special strength andtoughness, in an optimal combination with MT-Ti(CN), thick layerAL2 O3, Tin coating.itis a suitable gradesfor a wide application.It is good for the finishing.Semi-finishingand Light roughing of steel, cast steel and stainlesssteel.
XHC351:Substrate with high strength and resistanceagainst plastic deformation, in combination with MT-Ti(CN), thicklayer AL2 O3, TiN coating.It is suitable forlight roughing and roughing steel, cast steel and stainlesssteel.
XHM151:Substrate with special structure, in combinationwith Ti(CN), thin layer AL2 O3, TiN coating.Withthe resistance against diffusion wearness and plasticdeformation, it is good for finishing and semi-finishing(turning aswell as boring)of stainless steel.
XHM251:Substrate with good toughness and stength, incombination with Ti(CN), thin layer AL2 O3,Tin coating .It is a premium grade for semi-finishing to lightroughing (turning and boring) of stainless steel at continuous andintermittent machining conditions.
XHM351: Ti(CN), thin layer AL2 O3,Tin coating with very good strength and impact resistance.It issuitable for roughing turning of stainless steels at low tomoderate cutting speed or interrupted cutting, also for highcutting speed and heavy cutting in P30 area.
XHG102: in combination with PVD TiN, TiAIN coatedcarbide grade.Suitable for finish machining of castiron.
XHG151:In combination with PVD TiN, TiAIN coatedcarbide grade.Suitable for semi-finish turning of castiron.
XHG252:In combination with PVD TiN, TiAIN coatedcarbide grade.Suitable for rough machining of castiron.
XHD252:In combination with PVD TiN, TiAIN coatedcarbide grade.Suitable for rough machining of hard cast iron,nodular cast iron.
2)Advantages:
1.producedwith advanced German equipments and perfectworkmanship
2.We are goodat process.Every pieces would do it, not Batchprocessing
3. Long uselifetime and stable performance
4.Good qualitywith competitive price
Our GermanEquipments:
3)Other MainProducts:
Aluminum turninginserts
Commonlyusedmodels:CCGX, DCGX , TCGX , VCGX , SCGX , SEHT, APKT.
Turning inserts
Commonlyusedmodels:CNMG, SNMG , TNMG , CCMT , WCMX , DNMG , SNUN , TNGA,
TNUN , WNMG , DCMT , RPMT
Cermet and Ceramicsinserts
Commonlyusedmodels:
SEKN , SPKN , SPRN , SEEN , TNGG , CNMG , SNMG, TNMG , CCMT , DNMG , WNUN ,
WNMG
Milling inserts
Commonlyusedmodels:
SEKN , SPKN , RDKW , RPMW , TPCN , TPKN , TPAN, APKT , APKT
4)Company Brief Introduction:
ZhuzhouXinhuaCementedCarbideIndustryCo., Ltdis alargemanufacturer and exporterfor cemented carbide and cermetinserts(such as:milling inserts,turning inserts and Aluninum inserts and so on)in China.
Our factory set upmore than twentyyears,and there have a abundant of experience to manufacture the cementedcarbide inserts.Our produces sell well in Suoth America, EU , Asianand so on.
“Whatshould I do?I haven’tfound the insert type in your Ablibaba”.Itdoesn’tmatter, we can according to your request to manufacture theinserts.
ZhuzhouXinhua Carbide Industrial Co., Ltd., aiming at internationalup-to –datelevel, has always focused on upgrading its technology andreinforcing its management.
If you haveanything unclear, pls send the inquiry to us, we will reply youwith the first time.Thank you!
