Specifications:

• Cermets are being used instead of tungsten carbide in saws andother brazed tools due to their superior wear and corrosionproperties. Titanium nitride (TiN), Titanium carbonitride (TiCN)titanium carbide (TiN) and similar can be brazed like tungstencarbide if properly prepared however they require special handlingduring grinding.

Description:





Major
Grade of Cermet







1, Performance parameters of MC102





Density:6.95 g/cm3 , Hardness HRA:92.5,Flexural
strength:1800 N/mm2, Fracturetoughness:10.5  






Feature:on the premise of ensuring strength , ithas
high red-hardness and wear resistance , Suitable for the finishingand
ultra-fine finishing in low load and low impact force condition tothe
processing of bearing steel, carbon steel, low alloy steel, andgray cast iron
ect.





Usage:Finish turning





Equivalent to classification of
ISO:P01-P05, K01-K05.








2, Performance parameters of MC206





Density:7.0g/cm3 , Hardness HRA :92.5,Flexural
strength :2300 N/mm2, Fracture toughness:11.2





Feature:High strength, high wear resistance andlow
friction coefficient, suitable for finishing and semi-finishing ofmild steel,
normalizing gear steel, gray cast iron and ductileiron.





Usage:Turing, Milling





Equivalent to classification of
ISO:K05-K10, P01-P10, M05-M10.








3, Performance parameters of MC509





Density:7.1g/cm3 , Hardness HRA :92.1,Flexural
strength:2800N/mm2, Fracture toughness:12.4





Feature:high toughness , and may bear heavyimpact
load. General used for milling, medium-rough turning of soft steel,gray cast
iron, Al alloy and bearing steel.





Usage:Milling, wearing piece





Equivalent to classification of ISO:P10-P20,K10-K20.








4, Performance parameters of MC911





Density:7.05g/cm3 , Hardness HRA :92.3,Flexural
strength:2000 N/mm2, Fracture toughness:11.3





Feature:Performance between MC102 and MC509, Itis
hard to form crescent depression and suffered some impact, high
heat-resistance. suitable for semi-finishing of soft steel, graycast iron, Al
alloy and bearing steel, and finishing of stainless.





Usage:Turing, Milling





Equivalent to classification ofISO  :P05-P15, K05-K15, M05-M20