Description:
1.Carbide cold heading dies2.carbide drawing metal wire dies
3.good wear resistance
4good polishing
5.ISO9001:2008
Carbide cold headingdies
drawing die features for specicialwire
1.diameterrange:0.12mm-15.0mm
2.good wear resistance: HRA 89-93
3.excellent polishing
4.small frictioncoefficient
5.high thermalconductivity
6.good corrosionresistance
7.small adhesion
roughness Rcan control with0.05-0.80µm
ovality:can control≤0.004mm
concentricity:can control ≤0.05mm
perpendicularity:cancontrol≤0.10mm
casting:according to userrequirements , it can choose brass, 45#high quanlity carbonsteel, stainless steel, etc
Material grade for chosen
| Grade | ISO | Density | HRA | Bending Strength |
| YG3X | K01 | 15.1-15.3 | 93.6 | 1450 |
| YG3 | K01 | 15.1-15.3 | 92.4 | 1700 |
| YG6X | K10 | 14.8-15.0 | 92.5 | 2100 |
| YG6A | K10 | 14.8-15.0 | 93 | 1850 |
| YG6 | K20 | 14.9-15.1 | 91.1 | 2500 |
| YG8 | K20-30 | 14.6-14.9 | 90.3 | 2800 |
| YG15 | K40 | 14.0-14.2 | 88 | 2300 |
| ZL20 | 14.9-15.1 | 91.2 | 2200 | |
| ZL30 | 14.6-14.9 | 90.7 | 2300 | |
| ZL35 | 14.3-14.6 | 89 | 2300 |
Some pictures of our products
Tungsten carbide is a class of materials widely used in drawingdies because of their superior strength, toughness, and wearresistance.
Tungsten carbide punches and dies, well supported and properlyaligned, are satisfactory for blanking and punching. Good ferrousand non-ferrous wire is drawn through a series tungsten carbidedies in a process of elongating and reducing the wire''sdiameter. Recommended Grade for tungsten carbide dies: YG6, YG8,YG6X, YG8X, YG15, YG20C, YD40, YD45 etc.If you areinterested in our goods, please don''t hesitate to contact usfor further information.
website: http://zgxy.en.alibaba.com/
www.zgxymj.com
Contact : Alina Li
