Send Inquiry
Description:
DIN327 HSS 2 Flutes End MillManufacturing process: milled, fully ground
Material: HSS, HSS-Co
Helix Angle: 30
DIN327 HSS End Mill with 2Flutes
Specification:
| 1. Standard: | DIN327 |
| 2. Material: | HSS 4341(W4Mo3Cr4V),6542(W6Mo5Cr4V2) |
| M35 (W6Mo5Cr4V2Co5), M42(W6Mo5Cr4V2Co8) | |
| 3. Hardness: | HSS4341:HRC63-64, HSS 6542:64-65,HSS M35:HRC 66-67 HSS M42:HRC 67-68 |
4. Surface finishing: | Bright finihing/Tin-coatedor customization |
| 5.Application: | Mainly used for machining round headed flat key seats, Also used towork open grooves, some are used for insertion milling, drilling.Suitable for milling grooves with width requirements.Spiral-teethed structure ensures smooth cutting. |
6. Size:
| D | d2 | L | l | Z |
| MM | MM | MM | MM | |
| 2 | 6 | 48 | 4 | 2 |
| 2.5 | 49 | 5 | ||
| 3 | 49 | 5 | ||
| 4 | 51 | 7 | ||
| 5 | 52 | 8 | ||
| 6 | 52 | 8 | ||
| 7 | 10 | 60 | 10 | |
| 8 | 61 | 11 | ||
| 10 | 63 | 13 | ||
| 12 | 12 | 73 | 16 | |
| 14 | 73 | 16 | ||
| 16 | 16 | 79 | 19 | |
| 18 | 79 | 19 | ||
| 20 | 20 | 88 | 22 | |
| 22 | 88 | 22 | ||
| 24 | 25 | 102 | 26 | |
| 25 | 102 | 26 | ||
| 28 | 102 | 26 | ||
| 32 | 32 | 112 | 32 | |
| 36 | 112 | 32 | ||
| 40 | 40 | 130 | 38 | |
| 45 | 130 | 38 | ||
| 50 | 50 | 147 | 45 |
In addition, the quality ofHSS tools are basically decided by HSS raw material and heattreatment.
We can keep a strict control ofthese procedure.
Package:
Exporting outer carton, then inpallet.
Pls. contact us freely for moreinformation, I will reply you ASAP!
Hope you will enjoy a comfortablecooperation with us!
