Description:
Plastic Blow Molding Machine1. Capacity: 1200-1600pcs/hr (based on 500ml)
2. Max volume of product: 2 liter
Plastic Blow Molding Machine
CM-8Y semiautomatic bottle blow molding machine is suitable forproducing PET plastic containers and bottles from 10-2000ml. It iswidely used to produce the carbonated bottle , mineral water,carbonated drink bottle, pesticide bottle oil bottle cosmetics,wide-mouth bottle etc.
Adopting double crank to adjust mould , heavy locking mould, stableand fast , Adopt infrared oven to heat the perform , the performrotated and heated equally.
The air system has been divided into two parts: pneumatic actionpart and bottle blow part to meet the different requirements forthe action and blow .It can provide sufficient and steady highpressure for blowing large irregular shaped bottles.
The machine is also equipped with muffler and oiling system tolubricate the mechanical part of the machine.
The machine can be operated in the step-by-step mode and thesemi-auto mode.
The machine is small with low investment, easy and safe to operate.
SPECIFICATION
Main parameter: | ||
Model | CM-8Y | |
Container | Product material | PET |
Volume | 0.1L-2.5L | |
Theoretical output | 1200-1600PCS/H | |
Preform length | 15mm-350mm | |
Preform inner diameter | φ5mm-38mm | |
Moulding | Max.mould plate Dimenstion(L x W) | 350x380mm |
Max.mould thickness | 180mm | |
Clamping force | 45KN | |
Mould opening stroke | 16mm | |
Machine size and weight | Main machine (L x W x H) | 160x60x161cm |
Main machine weight | 500Kg | |
Heater (L x W x H) | 187x63x145cm | |
Heater weight | 250Kg | |
Power | 17.5kw | |
