Send Inquiry
Description:
HDPE/LDPE/LLDPE Film Blowing ExtruderStable Machine system design prevents the rolls from tipping andensures creaseless film.
The main technical parameters of Double Molding Tool ExtrusionMachine:
| Model of film extruders | HD45×400 double mould | HD55×500 double mould |
| Material suitable | HDPE, LDPE, LLDPE | HDPE, LDPE, LLDPE |
| Film width(mm) | 300 | 400 |
| Film thickness(mm) | 0.01-0.15 | 0.01-0.20 |
| Screw diameter(mm) | 45 | 55 |
| Screw L/D ratio | 30:1 | 30:1 |
| Screw &Barrel material() | 38CrMOALA | 38CrMOALA |
| Die-head diameter(mm) | HDPE40, LDPE60 | HDPE45, LDPE80 |
| Thermo control zone(zone) | 6 | 6 |
| Thermo control of barrel(C) | 3 | 3 |
| Thermo control of die(C) | 3 | 3 |
| Heating power(KW) | 10 | 13 |
| Barrel cooling fan(KW) | 200 | 200 |
| Main. motor power(KW) | 11 | 15 |
| Air-ring diameter(mm) | HDPE90, LDPE180 | HDPE100, LDPE220 |
| Max output(KG/h) | 30-45 | 35-55 |
| Blower power(KW) | 370 / 2 | 550 / 2 |
| Length of take-up roller(mm) | 400 | 500 |
| Take-up motor power(KW) | 1.5 | 1.5 |
| Take-up speed(M/min) | 10-120 | 10-100 |
| Rewinding roller length(mm) | 400 | 500 |
| Max .dia .of winded roll(mm) | 700 | 700 |
| Rewinding motor power(Kgg.cm) | 30 | 30 |
If you have interests in our extruding machinery, pleasefeel free to contact us by email or send message on ourwebsite.
