Send Inquiry
Description:
Honeycomb Dehumidifying Dryer1.High performance
2.P.I.D. control pannel
3.Ceramic Honeycomb Rotary Humidifier
Honeycomb DehumidifyingDryer
Why you arerecommended to use dehumidifier?
Poor molding of plastic products mostly comes from poordehumidification and drying. U.S Plastic Association recommendsthat the plastic prior to molding must be dried to the watercontent of 0.02% and below. For defects including poortransparency, sticky pouring channel, blurs, bubble, bullion, flowmark, crack, poor dimension stability, internal stress andinsufficient product physical strength, the cause of most of themis that the plastic is not fully dehumidified and dried.Particularly, highly soaking plastic including PET, PBT, PA and PCrequires drying equipment with a super low dew point (dew point-40°C).
| Model | TDH-50 | TDH-80 | TDH-120 | TDH-150 | TDH-200 | TDH-300 | TDH-400 | TDH-500 | TDH-700 | TDH-1000 | TDH-1500 | TDH-2000 | TDH-3000 | |
| Dehumidifying Air Capacity | CMH | 50 | 80 | 120 | 150 | 200 | 300 | 400 | 500 | 700 | 1000 | 1500 | 2000 | 3000 |
| Dehumidifying Motor | KW | 0.55 | 0.55 | 0.75 | 1.1 | 1.5 | 2.2 | 3.8 | 5.5 | 7.5 | 9 | 18 | 26 | 39 |
| Regen. Motor | KW | 0.18 | 0.18 | 0.25 | 0.37 | 0.55 | 0.75 | 0.75 | 1.5 | 2.2 | 2.4 | 3.4 | 5.5 | 7.5 |
| Regen. Heater | KW | 2 | 2.7 | 3.5 | 4 | 4 | 6 | 6 | 9 | 15 | 15 | 20 | 20 | 30 |
| Pipe Size | inch | 2 | 2 | 2 | 2.5 | 2.5 | 3 | 3 | 3 | 6.5 | 6.5 | 6.5 | 6.5 | 6.5 |
| Rotor Motor Capacity | W | 15 | 40 | 60 | 80 | 120 | ||||||||
| Power Supply | V | AC380V, 3P 50/60Hz | ||||||||||||
| Control Voltage | V | AC220V, 1P | ||||||||||||
| Total Power | KW | 3.25 | 3.45 | 5.1 | 7.1 | 7.5 | 10 | 10.8 | 22 | 24.8 | 26.5 | 41.5 | 51.6 | 76.7 |
| Wires Specifications | 4×4 | 4×6 | 4×10 | 4×10 | 4×106 | 4×25 | 4×35 | |||||||
| Wires Length | M | 6 | ||||||||||||
| Dimensions | L(mm) | 740 | 790 | 790 | 883 | 883 | 1020 | 1020 | 1370 | 1370 | 1550 | 1910 | 2150 | 2160 |
| W(mm) | 632 | 720 | 720 | 800 | 800 | 935 | 935 | 1300 | 1300 | 1300 | 1300 | 1410 | 1600 | |
| H(mm) | 1330 | 1480 | 1480 | 1700 | 1700 | 2000 | 2000 | 2250 | 2250 | 2145 | 2145 | 2060 | 2500 | |
| Cooling Water Flow | GPM | 1.5 | 3 | 9 | 15 | 25 | 25 | |||||||
| Cooling Water Pipe Size | inch | 3/4 | 1 | 1.5 | ||||||||||
| Cooling Water Pipe Length | M | 6*2 | ||||||||||||
| Weight | KG | 150 | 200 | 220 | 260 | 280 | 320 | 330 | 420 | 445 | 470 | 600 | 710 | 900 |
| Option | Dew-point Indicators | |||||||||||||


