Description:
blow molding machine1, CE Certification
2, Advanced technology
3, Good after-sale service
4, Competitive price
ABLB75 fullautomatic plastic bottle blow molding machine
ABLB75extrusion bottle blow molding machine was specially designed formaking plastic water bottles, lubricant oil bottles, detergentbottles , plastic toys and other plastic containers not over8L.
Thefeatures of this machine:
(1)Itis suitable for producing PE, HDPE, PP, PVC, PETG, PS so on,plastic containers and bottles in all shapes are available, themax.product volume is up to 8L.
(2)Singlestation single die head design, very easy to operate andmaintenance.
(3)Mostcomponents of the blow moulding machine are from famous worldbrand.
(4)Fullyautomatic process with low power consumption, high efficiency,quick and safe operation, easy for maintenance.
(5)Multiplescrew available for double layer or tranparent liquid leverline.
(6)Autodeflashing device available, can remove the extra parts ofbottles.
(7)Autolubricant system controlled by PLC.
Mainparts of Machine | Picture | Explanation |
OilPump |
|
Oilpump From Japan YUKEN driving the machine |
Computercontrol system (PLC) |
JapaneseMitisubishi PLC
Usedto control all electrial components and touchscreen | |
Diehead |
Singledie head Stableand easy to maintenance | |
Autodeflashing unit |
Thisdevice is able to remove the extra parts ofproducts
| |
Productafter auto-deflashed |
Perfectproduct Saveyour manual Cost. | |
ElectricCabinet |
Thispart is the full electric components of themachine |
The main components of themachine.( ABLB75 )
electronic parts | |
Name | Trader |
Microcomputer control system | JapaneseMITSUBISHI |
TemperatureController | TAIWANYANHUA PID |
AuxiliaryRelay | OMRON |
contactor | Schneider fromFrance |
Electric motor | Three phase 220V or 380V |
PowerSource | TAIWANMEANWELL |
Transducer | TAIDAFROM CHINA |
hydraulic parts | |
Name | Trader |
Oilpump | TAIWANHIGH-TECH |
Valve | JAPANYUKEN |
Oilpump and connection | JAPANYUKEN |
Sealedpart | HALLITE |
air control system | |
Name | Trader |
Cylinder | AIRTAC |
AirValve | FESTO |
Technical Parameters: ( ABLB75 )
Max.Product volume | 8liters |
Outputcapacity | 120pcs/h |
Screwdiameter | 75mm |
ScrewL/D ratio | 24L/D |
Screwdrive power | 22KW |
Screwheating capacity | 6KW |
No.ofheating zone | 4zones |
Outputof HDPE | 100KG/H |
Oilpump drive power | 11KW |
Clampingforce | 78KN |
Max.sizeof mold | 188-600mm |
Moldstroke | 400 X450mm |
Max.diediameter | 180mm |
Blowingpressure | 0.6mpa |
AirVolume | 0.7M³/MIN |
Coolingwater pressure | 0.3mpa |
Waterconsumption | 60L/MIN |
|
|
|
|
