Description:
This automatic stretch & blow moulding machine is designed formaking PET bottles ( less than 2.5 liters) from PET preforms.General Information | MG-SS2500/2600 | MG-SS4500 | MG-SS6000 |
Clamping Force | 25T | 34T | 63T |
Clamping Stroke | 150MM | 150MM | 150MM |
Max. Stretching Stroke | 370MM | 370MM | 380MM |
Bottom Moving Stroke | 70MM | 70MM | 70MM |
Number of Cavities | 2 Cavity | 4 Cavity | 6 Cavity |
Theoretical Output | 2500 BPH | 4500 BPH | 5500BPH |
Max. Mould Thickness | 300MM | 300MM | 300MM |
Space Between | 400x380MM | 640x380MM | 800x400MM |
Tie Bars |
|
|
|
Electrical System | |||
Voltage Standard | 380v/3PH/50Hz or special order |
|
|
Number of Heating Zone | 2 Sections | 4 Sections | 6 Sections |
Total Power (MAX Loaded) | 28KW | 60KW | 216KW |
Container | |||
Max. Container Volume | 2.5L | 2.5L | 2.5L |
Neck Diameter Range | 32MM | 32MM | 15-40MM |
Max. Container Diameter | 35-110MM | 35-110MM | 35-110MM |
Max. Container Height | 400MM | 400MM | 400MM |
Auxiliary System | |||
Low Air compressor | 8-10 Bar | 8-10 Bar | 8-10 Bar |
High Air compressor | 30 Bar | 30 Bar | 30 Bar |
Air Dryer | 3.0/30 | 3.0/30 | 6.0/30 |
Dimension & Weight | |||
Blow molding machine | 200x180x220CM | 215x250x230CM | 227x400x190CM |
Preform Autoloader | 150x120x250CM | 150x120x250CM | 220x150x250CM |
Net Weight | 3.8ton | 6 ton | 7 ton |
