Description:
PET Bottle Blow Moulding Machine 4 Cavity 4000BPH1. blow moulding machine
2.3000-4000pcs/h
3.for PET bottles
4.full automat
PET Bottle Blow Moulding Machine 4 Cavity4000BPH
1.automaticpet blowing machine
2.fullautomatic
3.6cavity
4.reliablebrand
PET Bottle BlowMoulding Machine 4 Cavity4000BPH
Features
1.Stable performance with advanced PLC.
2.Conveying preforms automatically with conveyor.
3.Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater5.with an automatic thermostatic apparatus.
E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
PETBottle Blow Moulding Machine 4 Cavity4000BPH
Main parameter: | ||
Model | CM-A4 | |
Productivity | Depend on bottle design | 4000PCS/H |
Product type | Body diameter | 20mm-100mm |
Height | 50mm-350mm | |
Neck diameter | 15mm-38mm | |
Mold | Cavity | 4cavities |
Mold thick | 240mm | |
Mold | 500*500mm | |
Main machine power | Electrical source power | 380v 3Phase /220v 3Phase 50/60HZ |
Rated Power | 49kw | |
Really use power | 14kw | |
Air source | HP air compressor | 1.0m3/min 3.0MPa 2sets (each set 30KW) |
Air dryer | 2.0m3/min 3.0MPa 1set | |
Cooling water | Cooling water | 15L/min |
Size | L*W*H | 1908*1858*1920mm |
Weight | 3600kg | |
Auxiliary equipment(preform unscrambler) | L*W*H | 2000*950*2480mm |
Weight | 250kg | |
Resin available | PET | |
PETBottle Blow Moulding Machine 4 Cavity4000BPH
