Price:Negotiable

Send Inquiry

Description:

1.The suitable material is PE, PP...
2.Automatic machine.
3.imported component.
4.OEM manufacturer

  

 

 

 

THEEXTRUSION MACHINE---JN-S2L

 

 

 

 

 

 

 

 

 

 

THE MACHINESCONNECTION

 

 

 

 

 

 

 

Auto Extrusion Blow MoldingMachine(JN-S2L)

 

 

•     Singlestation
•     The Max. productvolume is 2 liters.

 

 

 

The features

 

 

1.     The screw adopts high potency melt to make surethe material well mixed.
2.     Adopt the frequency control of motor system toreduce the power consumption.
3.  Choose single and double station according to you output easily.
4.  Adopt the horizontal movement frame to improve stability and speed.
5.  The oil cylinder is in the center of the moldboard,uniform stress for quality products and increase life span.
6.  Three guild rod controller the mold open and clamp, to enhance the steadily and high efficiency.
7.  The extrusion frame use head device, to influence the melt material avoid joint with the mold.
8.  The extrusion head use spreader or screw type to well mixed the thickness and easy to change the different color.
9.  Adopt parison control when necessary for thickness.
10.  The professional oil system to reduce the strike and noise.
11.  Use auto circular cutting system and automatic conveyor belt for fully automatic produce when necessary.
12.  According customer''s request, labeling machine is assorted.

 

 

 

 

GeneralSpecifications(JN-S2L)

 

Max. productVolume    (L)	2
Dry cycle   (pc/h)	800
Screw diameter   (mm)	50
Screw L/D ratio     (L/D)	24~26
Screw motor power   (kw)	11
Screw heatingcapacity    (kw)	3.3~4.4
No. of heatingzone    (zone)	3
Output of HDPE   (kg/hr)	30~45
Oil pump driverpower    (kw)	7.5
Clamping force   (KN)	38
Mold Stroke   (mm)	138~368
Size of Mold (W*H)    mm	300*320
Max. Dia Diameter   (mm)	90
Die Heat Capacity   (kw)	2.8~3.5
Blowing Pressure  (Mpa)	0.6~0.8
Air Volume    (M³/Min)	0.4
Cooling WaterPressure    (Mpa)	0.3
Water Consumption   (L/min)	35
Weight of Machine   (Ton)	2.78
Size ofMachine(L*W*H)    (m)	3*1.6*2.1

 

 

 

 

 

 

 

 

 

 

 

MainCharacteristic

 

1.  Single station, single layer, 50mm screw, 11kw screw motor power, PE/ PP etc.

  

2.  Power supply: 380VAC,50Hz  (depending on client''scounty ).

  

3.  Die Head for choosing(thepicture is in the below):

     One diehead (up to 2L): 2L   around 240 bottles perhour

     Two diehead (up to 1L): 1L   around 500 bottles perhour

 

4.  CenterDistance:

     The detail youcan see the production Possibilities in the above.

 

5.  Deflashing system: Neck/handle/ bottom deflashing

 
6.  MOOG 100Points Parison Controller (Optional)

 

 

 

 

 

 

 

 

ComponentParts

( Type C Machine Component List )

 

 

 

 

Standard Items	Standard C
PC Screen	Germany SIEMENS PLC
Controller	Germany SIEMENS PLC
Oil Pump	HI-TECK
Main Direction Valve	Taiwan Northman hydraulic valve
Two-Way Proportional Valve	Taiwan Northman valve
Two-Way Multiply Throttle Valve	Taiwan Northman valve
Pilot Operated Check Valve	Taiwan Northman valve
Oil Seal	UK SEALTECH
Frequency	Taiwan DELTA
Blowing Valve	Taiwan AIRTAC
Motor Component	SHANGHAI DASU
AC Contactor	France SCHNEIDER
Air Switch	France SCHNEIDER
Thermal Relay	France SCHNEIDER
Small Relay	France SCHNEIDER