Send Inquiry
Description:
PIPE PRODUCTION LINE1)AC motor Inverter, HOLIP brand
2)Relay: Schneider
3)Temperature controller: Japan Omron
PIPE PRODUCTION LINE
Item NO | Description |
| 1 | Vacuum Loader |
| Loading motor: 1.5kw Barrel volume: 12L Barrel material: SS304 stainless steel Max Vacuum Pressure: 18000Pa Loading capacity: 400kg/h Loading pipe size: Φ32mm Loading control: time relay automatic control | |
| 2 | Hopper Drying Machine |
| Heating power: 10kw Storage tank (L*W*H): D600*H850mm Volume: 100KG Barrel material: SS304 Heating time setting, time relay Cooling blower: 0.55kw | |
| 3 | SJ-75/33 Single Screw Extruder |
| Screw:Diameter of screw: 75mm, L/D Ratio: 33:1 Screw type: single screw Material of screw: 38CrMoAlA Surface treatment: Nitriding processing, thickness: 0.4 ~ 0.7mm, Max. rotating speed:10-150rpm Barrel: Inner processing: Nitridinglayer with thickness: 0.4 ~ 0.7mm Heating zones: 5 sections, Heating power: 25kw Heater: Cast Aluminum stainless steel covering Cooling method: Air cooling, Blower power:0.25KW Speed Reducer: Hard gearsvertical speed reducer, The body material:HT250 Gears material: 20CrMoTi hard gears and conical gears, gears surfacecarburization Axle material:40Cr Driving motor: 90KW , DC speedcontrol Electric cabinet: AC motor Inverter, HOLIPbrand Relay: Schneider Temperature controller: Japan Omron brand Self protective system: Over current protective of motor Over pressure protective of screw. | |
| 4 | SJ-25/25 Co-Extruder |
| Screw:Diameter of screw: 25mm, L/D Ratio: 25:1 Material of screw: 38CrMoAlA Surface treatment:Nitriding processing, thickness: 0.4 ~ 0.7mm,Polishing Max. rotating speed: 3-30rpm Barrel:Inner processing: Nitriding layer with thickness: 0.4 ~0.7mm Heating zones: 3 section, Heating power: 6kw Heater: Cast Aluminum stainless steel covering Cooling method: self cooling blower motor: 0.6KW Driving motor: Motor power: 1.1KW, AC frequencecontrol Speed Reducer: spindle wheelswinging reducer Electric cabinet: ABBInverter, Schneider contactor and RKC Temperaturecontroller | |
| 5 | GM-250 Screw extrusion die head and sizing device |
| Diameterrange: 16~63mm Mould material: 37Cr surface Chrome Plate Mould heating: stainless steel heating device Copper moulding and cooling cylinder Adopt screw extrusion die head to improve the pipe machinestrength Including:fundamental model 1set,Material:45 Heat zone:4 section,Heating power:20KW extrusion die(φ75,φ90, φ110,φ160, φ200,φ250)1 set ,material :45 mandrel(φ75,φ90, φ110,φ160, φ200,φ250)2 set ,Material:45 Sizing device(φ75,φ90, φ110,φ160, φ200,φ250)1 setMaterial:tin bronze | |
| 6 | 250 Vacuum Caliber Moulding Machine |
| Vacuum pump:4kw*2pc Water pump: 5.5kw*2pc Length: 6000mm Cooling method: Nylon atomizer showers Position adjuster: 0.75kw Material of tank: stainless steel the up and down of tank adjustment distance:70mm, Manualoperation Cross adjustment distance:40mm Manualoperation longitudinal movementdistance:1000mm, Power driven, Motorpower:0.75KW | |
| 7 | 250 Spray cooling tank |
| Length:6000mm Cooling method: showers cooling Showers cooling in 4 positions Water pump: 5.5 kw Tank material: SS304 3mm thickness | |
| 8 | 250 Four- Crawler-type Hauling Off Machine |
| Motor power:4kw Effective Hauling lenght: 1.5m Hauling speed: 0.3-3m/min AC frequence controls the hauling speed Belts material: rubber Manual tighten and can be adjusted Crawler belt: 4 pcs Schneider contactor, ABBinvertor | |
| 9 | 250 Pipe Cutting Machine |
| Cutter Motorpower: 2.2kw Diameter of cutting blade: 90mm Cutting blade material: alloy steel Air force tighten device, Cutting feed motor power:0.75KW Control method: time relay and manual two ways Cutting method: synchronize cutting with no dust Emergent stop switch Cutting pipe Dia:φ75-φ250 Cutting rotating motor power:1.5KW schneidercontactor, ABB Invertor, MitsubishiPLC | |
| 10 | 250 Stacker |
| Has the pipelength counting device, 2pcs Air Force cylinder controls the piling work Length: 5000mm The parts contacted with pipes made of stainless steel304 | |
