Send Inquiry
Description:
plastic forming machine1.more safety high efficiency
2.two lower dies in turn working
3.nice design request
plastic formingmachine
1.INJECTION WEIGHT64g
2.THE CLAMPING FORCE IS30T
3.THE PLATEN SIZE IS4370x200MM
| Machine Type | Unit | TA-300/S/DS/LS | |
| Screw Diameter | mm | 28 | 32 |
| Injection Pressure | kgf/cm² | 1446 | 1109 |
| Theoretical Injection Volume | cm³ | 88 | 115 |
| Max.Shot Weight(PS) | g/oz | 81/2.0 | 105/2.3 |
| Injection Rate | cm³/sec | 62 | 71 |
| Number Of Temperature Control | zone | 3 | |
| Clamping Force | kn | 300 | |
| Distance Between Tie Bare | mm | 370x200 | |
| Top Platen Size | mm | 495x325 | |
| Bottom Platen Size | mm | 540x380 | |
| Sliding Platen Size | mm | S:350x340 | |
| DS:350x680 | |||
| LS:350x415 | |||
| Min.Mold Height | mm | 120 | |
| Opening Stroke | mm | 180 | |
| Max.Opening Distance | mm | 300 | |
| Nozzle Center Heignt | mm | — | |
| Nozzle Center Distance | mm | — | |
| Ejector Force | kn | 13 | |
| Ejector Stroke | mm | 35 | |
| Max.Hydraulic Preesure | kgf/cm² | 140 | |
| Oil Tank Capacity | L | 140 | |
| Pump Motor Power | (Hp)kw | (5)3.7 | |
| Barrel Heating Power | kw | 3.3 | |
| Total Wattage | kw | 7 | |
| Machine Weight | kg | 1100 | |
| Machine Dimensions | cm | 130x90x235 | |
