Description:
Interior Wall Boarding Machine:1 Extrusion technique patent
2 Suitable design
3 Easy for operation and maintenance
First Class Interior Wall BoardingMachine:
1What panels can this machineproduce
1.1 Materials:
JQTSeries Lightweight wall making machine take industrial ash andslag, fly ash, coal gangue, pumice, shale, haydite etc of one ormore, add a certain proportion of ordinary cement, expanded perliteas raw material, you can add 1.6-4mm low carbon steel wire in thewall panel as support strengthened material.
1.2 Lightweightwall panels
JQT Lightweight wall panel making machine technicalparameters:
Modle | JQT9x60 | JQT12x60 | JQT18x60 | Remark |
Width(mm) | 595±2 | 595±2 | 595±2 |
|
Thickness(mm) | 90±1 | 120±1 | 180±1 |
|
No. of holes and hole diameter(mm) | 7x58 | 5x85 | 3x132 |
|
Panel making speed(m/min) | 1.1-1.7 | 1.1-1.7 | 1.1-1.7 |
|
Main motor (kw) | Y112M-4 | Y112M-4 | Y132S-4 |
|
Vibrator(kw) | ZW5A-0.8 | ZW5A-0.8 | ZW 10B-1.1 |
|
Overall dimensions (mm) | 2560x950x980 | 2560x950x980 | 2560x950x980 |
|
GW(kg) | 1100 | 1300 | 1800 |
|
We can design and produce different machineaccording to your requirement.
1.3 The Advantage of Lightweight wallpanels:
2 The feature of thismachine:
2.1 The principle of this machine:
There is aseries of spiral blades in the molding cavity formed by the theextruder''s side walls, vivration plate, scraping plate and thepedestal, the blades rotate as the required direction, continuouslypush the dry and hard concrete which is mixed evenly, compoundedsuitably under the vivration plate and scraping plate , plus theconstantly vibrating by the vibrator, it will make the powderconcrete compressed to tight, the slurry in the material will beextracted at the same time, so the original panel is formed in themolding cavity, the original panel will generate the reverse thrustto the spiral blades in a state that almost can''t be compressed,when the reverse thrust is greater than the friction generatedbetween the molding cavity and the original panel, the entiremachine will be pushed forward.The final panel will be formed whenthe original panel troweled through the side walls and the scrapingplate.
2.2 about theeasily-worn parts:
Spiral reamer, edge template, vibration plates, hang hooks, guidingreinforced mixture device etc easily-worn are surrounded by hardalloy welding, enhance easily-worn parts service lifeextremely.
3 Theproduction site and supporting machine:
3.1 The productionsite:
Production siteuse trams (channel steel orientation) or trackless (Ground sizzlingorientation) , the user can place order according to required
3.2The supporting machine:
1 setlightweight wall panel making machine
1 set steelbar tension machine,
1 set boardcutting machine,
1 setdumper
1 set concretemixer
1 sethammer crusher
4 Why chooseus
