Price:Negotiable

Send Inquiry

Description:

Injection molding machine for plastic chairs

Product Description

1. Clamping Unit: 
-Five points double toggle mould clamping mechanism is featuredwith fast opening & clamping, stable & energysaving. 
-Reliable low pressure protection function greatly prolongs theservice life of the mould. 
-Mechanical & double electric interlock protection devicesguarantee the safety of the operators. 

2. Injection Unit: 
-Infection platform is fixed by double axis pin plus flat key sothat it is stable. 
-Double cylinder balance infection molten material mechanismprovides high-pressure injection of molten material & safespace. 

3. Features of hydraulic system: 
-Perfect combination between computer & high efficientproportional plunger variable pump saves electricity by25%-50%. 

4. Controller: 
-Six stages material injection speeds & pressure, three stagespressure holding speed & pressure, and two stages materialmolten speed & pressure control can meet all complicatedprocess requirement of products. 
-Fuzzy temperature control is used. High & low temperaturedeviation alarm & thermocouple disconnection inspectionfunctions are available. 

5. IF YOU NEED MORE DETIALS, PLEASE ConTACT US.

Description	Unit	BJ850V1
Clamping Unit
Clamping Force	KN	8500
Opening Stroke	mm	1030
Max daylight:	mm	2080
Platen size	mm	1550x1500
Space between Bars(H*V)	mm*mm	1030x1030
Max. Mold Height	mm	1050
Min. Mold Height	mm	380
Ejector Stoke	mm	300
Ejector Force	KN	290
Injection Unit
Screw Diameter	mm	90 100 110
Screw L/D Ratio		22.5 21 18.8
Injection Pressure	Mpa	227 184 152
Shot Volume	cm3	2990 3691 4467
Shot Weight(PS)	g	2810 3469 4197
Shot weight(PS)	QZ	99.1 122.4 148.1
Injection Rate	g/sec	519 641 775
Plasticizing capacity	g/sec	73 87 108
Screw Stroke	mm	470
Screw   Speed	rpm	136
Power Unit
Hydraulic System Pressure	Mpa	17.5
Pump Motor Power	KW	37 37
Heater Power	KW	42
General
Dry-cycle time	sec
Oil Tank Capacity	L	1300
Machine Weight	Ton	44
Machine Dimensions(L*W*H)	m*m*m	11.0X2.6X2.7