Send Inquiry
Description:
1:YF-Sprayer Blow Moulding Machine2:Best Price and Service
3:CE
1:YF-Sprayer Blow MouldingMachine
2:Best Price and Service
3:CE
| Model | YF-80PC | ||
| Suitable Materials | PC… | ||
| Real Output | When PC 5gallon water barrel720g | 1500-1900 pcs/day | |
| PC 5 gallon barrelweight | Suitable use as standard | 600-850g(adjusted bycontroller) | |
| Product Volume | 1cavity | 5gallon | |
| Extrusion Unit | Screw Diameter | 80mm | |
| Screw L/D Ratio | 22:1 L/D | ||
| Screw Speed | 40 r/min | ||
| Plasticizing Capacity | 90kg/h | ||
| Number of Heating Zone onScrew | 4 | ||
| Die Head Unit | Amount of die head | 1 | |
| Volume of Storage Jar | 4 L | ||
| PC storage capacity | 2Kg | ||
| Die-pin Diameter | 80mm | ||
| Number of Heating Zone | 4 | ||
| Clamping Unit | Work Station Amount | 1 | |
| Mold Board Amount | 4 | ||
| Mold Board Size | 700*700*66mm(L*W*T) | ||
| Clamping Force | 180KN | ||
| Mould Unit | Cavity amount | 1 cavity | |
| Max Mold Size | 750*500*500mm(L*W*T) | ||
| Lifter Unit | Turbine reducer lifter | 4 pieces | |
| Power Unit | Electrical Source | 220/380V, 3phase50/60Hz | |
| Screw Motor Power | 30kw | ||
| Clamping hydraulic motor | 7.5kw | ||
| Servo hydraulic motor | 4kw | ||
| Screw heating power | 10kw | ||
| Die head heating power | 5kw | ||
| Hopper dryer power | 4.5kw | ||
| Fan power(4pcs) | 0.12x4=0.48kw | ||
| Total Power | 58kw | ||
| Fact consumption power | 20kw/h(tested) | ||
| Waterhead | Water pool | ||
| Air Supplier Pressure | 0.8 Mpa | ||
| Air consumption | 0.5m3/min | ||
| Size of main machine | 3910x2060X3190mm | ||
| Weight of main machine | 9000kg | ||
| Auxiliary Equipments | Low Pressure Air Compressor 1Set | 0.8m3/min;1.25MPa;7.5KW;0.32m3 | |
| Air Tank 1 Set | 0.42 m3/0.8Mpa | ||
| Oil/water automatic mold temperaturecontroller 1 Set | Heating power 4.5kw;motor power0.5kw | ||
| These 3 auxiliary equipments is enough,no need other equipments. | |||
