Description:
Vacuum cooling eps block molding machine1)block size:6000*1210*1000mm
2)output:12-15pcs/h @15g/l
3)machine weight:16.2T
Vacuum coolingtype eps block molding machine
1)block size:6000*1210*1000mm
2)output:12-15pcs/h @15g/l
3)Vacuum cooling type eps block molding machine weight:16.2 T
4)Vacuum cooling type epsblock molding machine usesthe PLC and touch screen to control the Vacuum cooling type eps block molding machine''s entire production cycle,including the opening and cosing mould, filling , steaming,stablizing, cooling and ejecting.
5)Soldered with welded squaretubing and profile steel, Vacuum cooling type eps block moldingmachine can bear the high expansion force.,
The technical parametersof Vacuum cooling type eps block moldingmachine
Name | Unit | Specification | |
Cavity inner net size | mm | 6080×1250×1030 | |
Finished product size | mm | 6000×1210×1000 | |
Steam | inlet diameter | mm | Φ150 |
Pressure | MPa | 0.6~0.8 | |
Compressed air | Inlet diameter | mm | Φ50 |
Pressure | MPa | 0.6~0.8 | |
Cooling water | Inlet diameter | mm | Φ40 |
Pressure | MPa | 0.3~0.5 | |
Temperature | °C | 25~35 | |
Vacuum | Consumption of cooling water | m3/h | 0.9~2 |
Absorbing air speed | m3/h | 400×2 | |
Vacuum tank volume | m3 | 6 | |
Water discharge | mm | Φ80 | |
Pollution discharge | mm | Φ150 | |
Feeding guns inlet | mm | 63 | |
Feeding guns numbers | pcs | 20 | |
Hydraulic station | Smaller pump pressure | MPa | 10 |
Bigger pump pressure | MPa | 5 | |
Oil tank volume | L | 450 | |
Motor | Vacuum pump | kW | 11×2 |
Hydraulic | kW | 3.75 | |
Motor | kW | 7.5 | |
Overall Dimension | (L*W*H) | m | 14.7×3.2×3.25 |
Forming cycle | Min/cycle | 6~30 | |
Machine weight | t | 16.2 | |
