Description:
Higher performance-cost ratio, Stability, Safety.Dependingon the good performance and excellent after-sales service, KTVvariable pump series injection molding machine received all thereputations from the users. With the concept of “positiveinnovation, elaborate design, refined manufacture, keepingimproving ” Forstar dedicated herself to the product and service ofhigher performance-cost ratio, and we launch 09 version. based onthe previous superiority, KTV 09 version applies the toptechnology, upgrades the scheme and overall optimizes theperformances of the machine, which creates more econmicbenefits.
Higherperformance-cost ratio:
Strengthenthe rigidity of the whole machine, improved the processingprecision of mechanical part; overall upgraded scheme and importedcomponents of good quality, improves the reaction of the precisionof the machine ;increased safety device and service items improves;the whole performance; the upgrade of product quality and serviceand the competitive price, makes KTV 09 version has higherperformance-cost ratio.
Stability:
Applied topinternational technoligy, optimized design of oil pipes, thehydraulic oil runs more smoothly and the noise is much lower;improved plasticizing capacity can meet the requirements of generalplastics; overall improved scheme makes the machine running morestable and safe.
Safety:
According tothe international standard, we modify the safety cover; increasesome safety devices into standard scheme, such as alarm light,nozzle shield and urgent stop button on back door; optimize thelow-pressure mold protection oil pipe; increase the sensitivity ofthe low-pressure mold protection; improve the safety grade electricsystem. All of these supply the operator with the overall safetyprotection.
SPECIFICATON | UNIT | KT260V |
| International |
| 2600/1310 | |
INJECTION UNIT | |||||||
Screw Diameter | mm | 51 |
| Actual Shot Weight(PS) | g | 517 | |
60 | 715 | ||||||
66 | 866 | ||||||
Theoretical Shot Volume | cm3 | 562 | oz | 18.3 | |||
777 | 25.2 | ||||||
941 | 30.6 | ||||||
Injection Pressure | MPa | 234 | Screw L:D ratio |
| 25:1 | ||
169 | 21:1 | ||||||
140 | 19.4:1 | ||||||
Screw Speed | rpm | 183 | Screw Stroke | mm | 275 | ||
CLAMPING UNIT | |||||||
Clamping Mode |
| Double Toggle |
| Max.Daylight | mm | 1130 | |
Clamping Force | KN | 2600 | Mold Thickness(Min.Max.) | mm | 195-600 | ||
Opening Stroke | mm | 530 | Hydraulic Ejection Stroke | mm | 180 | ||
Platrn Size | mmxmm | 840x840 | Hydraulic Ejection Force | KN | 77 | ||
Space Between Tie Bars | mmxmm | 580x580 | No.of Eiector |
| 13 | ||
POWER UNIT | |||||||
Hydraulic System Pressure | MPa | 17.5 |
| Heating Capicity | KW | 18.3 | |
Pump Motoe | KW | 30 | No.of Temp Control Zones |
| 5 | ||
GENERAL UNIT | |||||||
Dry Cycle Time | sec | 2 |
| Machine Dimension(LxWxH) | mxmxm | 6.1x1.5x2.2 | |
Tank Volume | L | 440 |
| Machine Weight (Dry) | Ton | 9.0 | |
