Description:
PE Extrusion blow molding machine ZK-703 tie bar & liner guide
plate, barrel, auto parts, all kinds hollow product
PE Extrusion blow molding machine is
good quality and best price, can make the needs ofcustomers.
Features:
1) Controlled by Japanese PLC
2) Temperature controlled model
3) Interactive monitor with machine-humaninterface
4) imported hydraulic elements
5) Proportional control
6) imported electric elements
7) Hard gear surface reducer
8) Accumulator head with special steel
9) Vicker hydraulic valve, seal and proportionalcontrol
10) DELTA PLC Taiwan human machineinterface software in touch type famous brand electric elements
following is the technical specifications:
specification | unit | ZK-70A |
max container capacity | L | 20 |
machine dimension | M | 4*2.6*2.7 |
total weight | ton | 4.5 |
clamping system |
|
|
clamping force | KN | 160 |
plate opening stroke | mm | 250-800 |
max mould size(W*H) | mm | 520*600 |
mould thickness | mm | 260-400 |
power |
|
|
max drive | KW | 7.5 |
total power | KW | 40 |
fan power for screw | KW | 0.72 |
air pressure | Mpa | 0.7 |
air consumption | m3/min | 0.9 |
average energy consumption | KW | 20 |
extruding system |
|
|
screw diameter | mm | 70 |
screw L/D ratio | L/D | 25:1 |
plasticising capacity | kg/hr | 80 |
number of heating zone | zone | 4 |
extruder heating power | KW | 10 |
extruder driving power | KW | 15 |
die head |
|
|
number of heating zone | zone | 3 |
power of die heating | KW | 4 |
max die-pin diameter | mm | 250 |
accumulator capacity | L | 2 |
