Description:
automatic plastic bottle blowerStable performance with advanced PLC
Conveying preforms automatically with conveyor
automatic plastic bottle blower
YZ-6 FULLY AUTOMATIC BOTTLE BLOWING MACHINE.
Features:
Stable performance with advanced PLC
Conveying preforms automatically with conveyor
Strong clamping force with high
Procedure:
Step 1. Put the preform into preform container and the conveyerwill take the preform to orientation units automatically.
Step 2. Load the preform at neck up to preform holder, and thenpreform is conveyed into baking tunnel.
Step 3. After heating, preform is conveyed into the blowstation, then close the mold, stretch and blow under low pressureand high pressure, exhaust, open the mold.
Step 4. The finished bottle is taken off by automaticdischarging system
Paramters,
ITEMS | UNIT | YZ6 |
No. OF MOULD | SET | 6 |
WORKING PRESSURE | Bar | 7-8 |
AIR BLOWING PRESSURE | Bar | 30 |
HEIGHT OF BOTTLE | mm | 330 |
STROKE OF MOULD OPENING | mm | 130 |
THICKNESS OF MOULD | mm | 190 |
HEAT UNIT GROUP | Group | 4 |
HEATED-LIGHT LAYER | Layer | 9 |
MAX. HEAT POWER | kw | 35 |
VOLTAGE | V | 220-380 |
FREQUENCY | Hz | 50/60 |
PREFORM LENGTH | mm | ≤180 |
BITTLE NECK DIAMETER | mm | 20-28 |
BOTTLE DIAMETER RANGE | mm | 20-115 |
PREFORM RAW MATERIAL | kg | PET |
VOLUME RANGE | Layer | 0.2-2.25 |
CAPACITY FOR MINERAL BOTTLE | Pcs/h | 7500 |
WEIGHT | kg | ≤5800 |
DIMENSION OF MAIN MACHINE | cm | 310*231*198 |
DIMENSION OF HEATER | mm | It is the section of the main machine andcontained it. |
PREFORM-TIDIED MACHINE SIZE | mm | |
DIMENSION OF ELECTRICAL BOX | mm |
