Price:Negotiable

Send Inquiry

Description:

1.The suitable material is PE, PP, PVC
2.Automatic machine.
3.imported component.
4.OEM manufacturer

   

Auto Extrusion Blow MoldingMachine(JN-S5L)

 

•     Single station
•     The Max. product volume is 5 liters.

 

 

 

 

The Features:

 

1. The screw adopts high potency melt to make sure the materialwell mixed.
2. Adopt the frequency control of motor system to reduce the powerconsumption.
3. Choose single and double station according to you output easily.
4. Adopt the horizontal movement frame to improve stability and speed.
5. The oil cylinder is in the center of the moldboard,uniform stress for quality products and increase life span.
6. Three guild rod controller the mold open and clamp, to enhance the steadily and high efficiency.
7. The extrusion frame use head device, to influence the melt material avoid joint with the mold.
8. The extrusion head use spreader or screw type to well mixed the thickness and easy to change the different color
9. Adopt parison control when necessary for thickness.
10. The professional oil system to reduce the strike and noise.
11. Use auto circular cutting system and automatic conveyor belt for fully automatic produce when necessary.
12. According customer''s request, labeling machine is assorted.

 

 GeneralSpecifications(JN-S5L)

 

Max. productVolume    (L)	5
Dry cycle   (pc/h)	600
Screw diameter   (mm)	70
Screw L/D ratio     (L/D)	24~26
Screw motor power   (kw)	15
Screw heatingcapacity    (kw)	4.8~7.5
No. of heatingzone    (zone)	3
Output of HDPE   (kg/hr)	50~60
Oil pump driverpower    (kw)	7.5
Clamping force   (KN)	60
Mold Stroke   (mm)	148~508
Size of Mold (W*H)    mm	370*390
Max. Dia Diameter   (mm)	145
Die Heat Capacity   (kw)	3.5~4.3
Blowing Pressure  (Mpa)	0.6~0.8
Air Volume    (M³/Min)	0.6
Cooling WaterPressure    (Mpa)	0.3
Water Consumption   (L/min)	55
Weight of Machine   (Ton)	3.9
Size ofMachine(L*W*H)    (m)	3.5*1.8*2.1

 

Main Characteristic:

 

1.  Single station, single layer, 60mm screw, 15kw screw motor power, PE/ PP etc.

  

2.  Power supply: 380VAC,50Hz  (depending on client''scounty ).

  

3.  Die Head for choosing(thepicture is in the below):

     One die head(up to 5L): 5L   around 150 bottles per hour

     Two diehead (up to 2L): 2L   around 350 bottles perhour

     Three diehead( up to 1L): 1L   around 550 bottles per hour

     Four diehead(up to 500ml): 500ml around 750 bottles per hour

 

4.  CenterDistance:

     The detail youcan see the production Possibilities in the above.

 

5.  Deflashing system: Neck/handle/ bottom deflashing

 
6.  MOOG 100Points Parison Controller (Optional)

 

 

Component Parts

( Type C Machine Component List )

 

1.  PLCcontroller: Germany SIEMENS
2.  FranceSchneider low-voltage apparatus
3.  Domestictest components
4.  SiemensBeide electrical motor
5.  TaiwanDelta VFD-B frequency
6.  USAVickers hydraulic valve
7.  TaiwanAirtac air valve(UAS numatic air valve)

 

 

•       No 1 & No 5. Eelectrical controlpanel
•             Brand: Schneider andOMRON

 

• •       No 2. Pneumatic System
  •             Brand: Schneider

 

• •       No 3. Oil Pump/Selector Valve
  •             Brand: Northman orVickers

 

• •       No 4. Oil Pump/ Selector Valve
  •             Brand: VICKERS orYUKEN

 

• •       No 6.  Hydraulic System
  •             Brand: TaiwanNorthman, Japan YUKEN, and America VICKERS

 

• •       No 7. Parison Controller
  •             Brand: MOOG(100points)

 

• •       No 8. PLC
  •             Brand: SIemens