Description:
1PID intelligent temperature control2Adopt closed inner heating mold
3Non-stop roll exchange
4CE certification
5Good output
Anti-slip PVC floor& car plastic flooring producemachine
Introduction
The unit use PVC(polyvinyl chloride) asraw material , composite withneedle-
punched nonwoven(soundproof cotton) to mold PVCfloor & car plastic floor.
Main technicalspecifications:
The mainframe power supply | AC380V |
The electronic control power supply | AC380V |
Total power | 220KW |
Average working power | 100kw----150kw |
The linear speed design | 3----15m/min |
The length of die | 2000mm |
The width of products | 1500mm---1800mm |
The thickness of composite layer | 1.0mm---2.0mm |
Mold material | 40Cr |
The circulating volume of cooling water | 120L/min |
The air tube diameter | Ø8 |
Advantages:
1.the unit''s composite parts, embossed parts ,and winding parts can achieve frequency-converting , make the speedsteady
2.the mold adopts closed inner heating , cavitycoated with hard chrome.
3.the temperature control adopts PID intelligenttemperature control, high precision, energysaving.
thepicture of the whole machine:
the pictures of theproducts:
the picture of ourfactory:
Our company is famous for the plastic machine and has involved in this lines
for years , we can also customize special machine according to our customer''s
requirements.
If you have any requires of the plastic machine , please contact
us without any hesitation , we are looking forward to yourinquiry.
Contact person: Gloria
TEL:0086-312-5797828
FAX:0086-312-5797588
Mobile:0086-15030223379
