Price:Negotiable

Send Inquiry

Description:

vertical machine for plastic
1.the clamping force is 40T
2.the injection weigh is 80-120g
3.the platen size410x250mm

NINBGO TAAI vertical machine FOR PLASTICPARS

1. The lower die is fixed and the upper die is moveable which isfit for the injection moulding of the inlaidpieces.   

2. The design of vertical compression typed master/slaveclamping cylinder, high-speed and low-pressure matched die andmultiple pressure control increase the servie life of die and havea high safety.        

3. Injection pad can up and lift automatically, which iscovenient for the installation of die and the cleanout of rawmaterials.    

4. The injection and charging system adopts a vertical design,clamping system is installed in the lower part of the machine. Thestructure is solid and simple and does not occupy the space.             

 5. Four column full hydraulic clamping, can be heightenedthe thickness of the die and increased the height of mould.           

 6. Adopt computer liquid crystal display (LCD), which candisplay the function clearly and precisely. It can also store 68groups of moulding parameters at random

Machine   Type	Unit	TA-400/S/DS/LS
Screw Diameter	mm	32	35
Injection   Pressure	kgf/cm²	1483	1240
Theoretical   Injection Volume	cm³	121	144
Max.Shot   Weight(PS)	g/oz	110/3.9	131/4.6
Injection Rate	cm³/sec	63	74
Number Of Temperature Control	zone	3
Clamping Force	kn	400
Distance   Between Tie Bare	mm	410x250
Top Platen   Size	mm	555x380
Bottom Platen   Size	mm	580x420
Sliding Platen Size	mm	S:396x420
		DS:396x840
		LS:396x420
Min.Mold   Height	mm	195
Opening Stroke	mm	200
Max.Opening   Distance	mm	395
Nozzle Center   Heignt	mm	—
Nozzle Center   Distance	mm	—
Ejector Force	kn	22
Ejector Stroke	mm	35
Max.Hydraulic   Preesure	kgf/cm²	140
Oil Tank   Capacity	L	180
Pump Motor   Power	(Hp)kw	(7.5)5.5
Barrel Heating   Power	kw	3.3
Total Wattage	kw	8.8
Machine Weight	kg	1600
Machine   Dimensions	cm	170x100x235